About your printer

All articles

• 

  Shipping information

  MK4 to MK4S upgrade  The current lead time is 2-3 weeks for both xLCD versions. Order week Order date Shipping estimate Week 33 starts August 12, 2024 Already shipped Week 34 starts August 19, 2024 Week 35 starts August 26, 2024 Currently ...

• 

  Prusa firmware-specific G-code commands

  This is a list of currently implemented G-Codes in Prusa firmware for i3 series printers. The description is only for Prusa Research-specific G-codes. The rest can be found on RepRap Wiki. ...

• 

  Flexible steel sheets (guidepost)

  The Original Prusa magnetic heatbed is designed to hold a removable double-sided flexible spring-steel sheet, designed specifically for easy removal of printed objects from the print surface. We offer four different ...

• 

  Thermal model calibration

  Starting from firmware 3.12.0, the Original Prusa MK3/S/+ has Thermal model protection. This results in better operation when dealing with thermal errors. How it works During the print, the printer is constantly ...

• 

  Customer support

  If you have any questions about 3D printing in general, about your order, shipping, calibration, or troubleshooting of your printer, don't hesitate to contact us! Printers that have non-supported modifications might ...

• 

  Steel sheet profiles

  The Magnetic heatbed enables you to use flexible, removable steel sheets. There are different properties and strengths of each sheet, but they also have different thickness which affects calibration. For more ...

• 

  Pronterface and USB cable

  Pronterface is an application where you can monitor and send commands to your printer. It is also possible to use it to start prints over USB, however, performance may vary. Pronterface ...

• 

  VAT (Value Added Tax) & Customs fees

  Orders within the EU As of 1 July 2021, updated EU VAT rules for business-to-consumer (B2C) transactions will apply. We, therefore, charge Value Added Tax (VAT), of the Standard rate, set ...

• 

  SD cards and USB drives

  As there are ways of remotely transferring files and starting prints, an SD card or USB flash drive is the most common and reliable way to get your files to ...

• 

  FAQ - Frequently Asked Questions

  How do I get the kit or assembled printer owner discount? As stated on our website: Prusa3D, if you purchase an assembled MK3S+ printer, we offer a 10% discount on your ...