EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
  • 日本語
Login

SD cards and USB drives

Last updated 8 months ago
This article is also available in following languages: 
CSDEESFRITJAPL

As there are ways of remotely transferring files and starting prints, an SD card or USB flash drive is the most common and reliable way to get your files to your machine. Though common and convenient, flash memory is not the most reliable in itself and your storage can be corrupted or fill up without any obvious signs. Therefore, we have put together a small guide on how to maintain, format, and purchase memory for your Original Prusa printer.

Make sure your SD card is not locked!

The SD card has a latch on the side. Before using your SD card, make sure that the latch is not set to the Locked position. In case it is locked, you will not be able to save files on the card, and the printer will not be able to open the SD card.

Storage over 32 GB

There is no upper size limit on compatible storage media, but the built-in Windows formatting tool does not support formatting storage media from a size of 32 GB or more to FAT32. It will only provide the option for exFAT, which is currently not supported by our printers. There are similar limitations under various versions of Apple's OSx, where a third-party application must be used to format it correctly.

To format such a drive you need a third-party application, like Rufus, FAT32 format, or EaseUS Partition Master. Be careful when using such programs so you do not accidentally format the wrong storage media, like your hard drive. However, 8-16 GB is more than enough for most use cases, as a G-code file rarely exceeds 100 MB.

How do I format the USB drive/SD card?

If your SD card or USB drive is full or if you can't read the content of the drive, but the drive is recognized by windows, most often all you need to do is to format the drive.

If your USB drive or SD card does not even show up in your computer file explorer it is probably corrupted beyond repair, or at least beyond the scale of this article. If you get an error like the one in the picture below and it does not show up anywhere, off to google you go, but you might have to consider this card/USB drive lost and get a new one.

How to format on Windows

On Windows, this is very simple. Locate your USB drive or SD card in my computer, right-click, and choose format.

A new small window will pop up. Most of the time you can simply leave everything to default, but the most important thing is that the File System is set to FAT32. This and the Volume Label (Name of the drive) is the only thing you want to touch here. Click Start and your drive will be formatted in a matter of seconds.

Formatting any drive will delete all the content of the drive! Back up your stuff!

If the USB stick will not work even after this procedure, it is either broken or its "partitioning scheme" is set as GPT, which is incorrect. It must be set as MBR (Master Boot Record). For how to change this, please see Microsoft's official documentation.

How to format on Mac

On Mac, it is a few more steps, but still very accessible. Again, you want to choose FAT32 as your file system, but you also have the option of changing the "partitioning scheme", which should always be MBR (Master Boot Record).

This process deletes all content from the drive.
  1. Plug the USB drive or SD card into your Mac.
  2. Go to Applications -> Utilities and launch Disk Utility.
  3. Click on the icon in the top-left (green arrow) and select "Show All Devices" from the drop-down menu.

macOS Big Sur 11.6

  1. Right-click on the USB drive/SD card in the sidebar under "External". Select the top entry for your drive, not a partition located below.
  2. Select Erase in the Disk Utility-toolbar (purple arrow).

macOS Big Sur 11.6

  1. Enter a name for the formatted disk.
  2. Click on the Format menu and choose MS-DOS (FAT).
  3. Make sure the Scheme is set to "Master Boot Record".

macOS Big Sur 11.6

  1. Click Erase.
  2. Your USB drive will now be erased and re-formatted correctly.
If your SD card is not detected by the printer at all, be sure to check out SD card not working for further information.
Was this article helpful?

Comments

Please sign in before adding a comment.
Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to info@prusa3d.com or through the button below.