Original Prusa XL support

Multi-material slicing

How to update firmware (CORE One, MK4/S, MK3.9/S, MK3.5/S, XL)

On the Prusa CORE One, Original Prusa MK4/S, MK3.9/S, MK3.5/S, and XL, the firmware is flashed using a USB flash drive. This is valid for all ways of firmware updating.  Offline…

Prusa Connect and PrusaLink explained

Prusa Connect and PrusaLink are two remote printing solutions developed in-house by Prusa. Its origin is in the management system used in our record-sized print farm located in…

Shipping information

Prusa CORE One Assembled shipping table Updated: March 19th, 2025  Batch number (Assembled) Estimated shipping from: 5 March 3. 2025 6 March 7. 2025 7 March…

Toolchanger problem (XL multi-tool)

While printing on the multi-tool version of the Original Prusa XL, an issue with the tool-changer mechanism might occur. For example, the tool-changer might attempt parking a tool…

Warping

When printing large objects, you can sometimes run into an issue with the corners of the object being lifted from the bed – mostly when printing with high-temperature materials…