1. Tools necessary for this chapter

Original Prusa XL Single-Tool (Semi-Assembled) (1.07)

• 1. Introduction
• 2. Base & Side frame assembly
• 3. CoreXY & Back assembly
• 4. Heatbed & Side panels assembly
• 5. Nextruder & accessories assembly
  1. Tools necessary for this chapter
  2. Nextruder cable bundle assembly info
  3. Variant A - Nextruder cable bundle assembly: parts preparation
  4. Variant A - Nextruder cable bundle assembly
  5. Variant A - Nextruder cable bundle assembly
  6. Variant A - Nextruder cable bundle assembly
  7. Variant B - Nextruder cable bundle assembly: parts preparation
  8. Variant B - Nextruder cable bundle assembly
  9. Variant B - Nextruder cable bundle assembly
  10. Variant B - Nextruder cable bundle assembly
  11. Preparing the printer
  12. Installing the Nextruder: parts preparation
  13. Installing the Nextruder
  14. Securing the Nextruder
  15. Guiding the Nextruder cable
  16. Attaching the Nextruder dock
  17. Preparing the Filament sensor
  18. Attaching the filament sensor
  19. Haribo time!
  20. Wi-fi antenna holder versions
  21. Side version: Connecting the extruder cable
  22. Side version: Installing the Wi-Fi antenna: parts preparation
  23. Side version: Installing the Wi-Fi antenna
  24. Back version: Connecting the extruder cable
  25. Back version: Wi-Fi antenna holder: parts preparation
  26. Back version: Installing the Wi-Fi antenna: antenna preparation
  27. Back version: Installing the Wi-Fi antenna: antenna prepartion
  28. Back version: Installing the Wi-Fi antena holder
  29. Back version: XL buddy box covering
  30. Back version: Installing the Wi-Fi antenna: parts preparation
  31. Back version: Installing the Wi-Fi antenna
  32. Spoolholder assembly versions
  33. Printed spoolholder: parts preparation
  34. Printed spool holder: adjusting the nut
  35. Printed spool holder: assembly
  36. Printed spool holder: Mounting the spool holder
  37. Injection molded spoolholder: parts preparation
  38. Injection molded spool holder adjusting the nut
  39. Injection molded spool holder: assembly
  40. Injection molded spool holder: preparing the spool holder
  41. Injection molded spool holder: mounting the spool holder
  42. Haribo time!
  43. Well done!
• 6. First run
• Manual changelog