1. Tools necessary for this chapter

Original Prusa XL Single-Tool (Semi-Assembled) (1.07)

• 1. Introduction
• 2. Base & Side frame assembly
• 3. CoreXY & Back assembly
• 4. Heatbed & Side panels assembly
  1. Tools necessary for this chapter
  2. Side panels preparation
  3. Left side panel assembly (part 1)
  4. Left side panel assembly (part 2)
  5. Right side panel assembly
  6. Haribo time!
  7. Heatbed assembly versions
  8. Heatbed assembly preparation
  9. Heatbed terminals preparation
  10. Connecting the Heatbed cables
  11. Assembling the Heatbed
  12. Preparing the heatbed cable screws
  13. Fixing the heatbed cables in place
  14. Removing linear rail stoppers
  15. Installing the Heatbed
  16. Attaching the Heatbed
  17. Preparing the Z-Axis bearing housing
  18. Installing the Z-Axis bearing housing
  19. Preparing the Heatbed screws
  20. Fixing the X-axis side parts in place
  21. Haribo time!
  22. Good job!
• 5. Nextruder & accessories assembly
• 6. First run
• Manual changelog