Relevant for
Each Original Prusa printer is shipped with a bundle of sample G-codes. These G-codes are tested and tailored specifically for your printer model and can be used to see the printer's capabilities or troubleshoot.
Find your printer in the table and download the zip archive. The model geometry (.stl/.3mf) and the presliced version (.gcode) are included.
| Printer model | Printer type | 3D models | G-codes |
| CORE One INDX | FFF | Models | G-codes |
| CORE One L | FFF | Models | G-codes |
| CORE One | FFF | Models | G-codes |
| MK4S/MK3.9S | FFF | Models | G-codes |
| MK4/MK3.9 | FFF | Models | G-codes |
| MK3.5/S | FFF | Models | G-codes |
| MK3S+ | FFF | Models | G-codes |
| MK3S | FFF | Models | G-codes |
| MK3 | FFF | Models | G-codes |
| MINI+ | FFF | Models | G-codes |
| MINI | FFF | Models | G-codes |
| XL 1T | FFF | Models | G-codes |
| XL 2T | FFF | Models | G-codes |
| XL 5T | FFF | Models | G-codes |
| MMU3 & MK4 | FFF | Models | G-codes |
| MMU3 & MK4S | FFF | Models | G-codes |
| MMU3 & MK3S/+ | FFF | Models | G-codes |
| MMU2S & MK3S/+ | FFF | Models | G-codes |
| MMU2S & MK2.5S | FFF | Models | G-codes |
| MMU2 & MK3 | FFF | Models | G-codes |
| MMU2 & MK2.5 | FFF | Models | G-codes |
| MMU1 & MK2 | FFF | Models | G-codes |
*The archive includes G-codes for both MK4 and MK3.9 printers. G-codes are sliced for Input Shaper and older non-Input Shaper firmware. To print the Input Shaper G-codes, please make sure your printer is running firmware 5.0.0 or newer.
| Printer model | Printer type | 3D models | G-codes |
| Original Prusa SL1S | MSLA | Models | G-codes |
| Original Prusa SL1 | MSLA | Models | G-codes |
4 comments
and what about a CORE One with MMU3? What would I choose with this configuration?
Best regards!´
Happy Printing Y'all!
He perdido los archivos de muestra que venían en el pendrive de la XL de 5 herramientas.
Donde puedo conseguirlos?
Hi Beren, G-codes were resliced shortly after the new firmware was launched. It should be OK now.