Sensore P.I.N.D.A.

Prusa INDuction Autoleveling probe, è un componente vitale che facilita la taratura delle nostre stampanti. Ci sono 2 diverse versioni: V1, utilizzata in MK2/S, e V2, utilizzata su MK2.5, MK2.5S, MK3 e MK3S. La differenza è che la V2 ha un termistore incorporato per compensare la differenza nelle misure a freddo e a caldo. V1 e V2 non sono intercambiabili.

Temperature Calibration

All induction proximity probes alter the sensing distance with increased temperature. This might affect the quality of the first printed layer. P.I.N.D.A. v2 probe, included in…

Leggi l'articolo

First Layer Calibration (i3)

The First Layer Calibration is used to calibrate the distance between the tip of the nozzle and the print surface. The aim is to adjust the nozzle height until the extruded plastic…

Leggi l'articolo

XYZ Calibration (MK3/MK3S/MK3S+)

The XYZ calibration is a process, which checks, whether the printer was assembled correctly and the axes are perpendicular to each other. It measures the skew of your X/Y axis…

Leggi l'articolo

Nozzle crashed into the heatbed

If this occurs it indicates a problem with the P.I.N.D.A. or SuperPINDA sensor. P.I.N.D.A. stands for Prusa INDuction Auto leveling. It is the Z-axis end-stop on the MK2/S and…

Leggi l'articolo

Misaligned PINDA Sensor (MK2/S)

A misaligned P.I.N.D.A. Sensor is an issue that can be fixed by fine-tuning the printer. To do that, you need to calibrate the P.I.N.D.A. sensor position on multiple spots around…

Leggi l'articolo

P.I.N.D.A./SuperPINDA Sensor testing

P.I.N.D.A. stands for Prusa INDuction Autoleveling sensor and is a vital component facilitating the calibration of our printers. There are 3 different versions: P.I.N.D.A. V1…

Leggi l'articolo