Italiano
Login

Sensore di filamento IR

Sensore ottico del filamento sull'estrusore, introdotto con l'upgrade S per la Original Prusa MK3/S e MMU2S. Sulla MK3/S, si attiva quando la sfera d'acciaio spinge la fs-lever nel sensore. Sul MMU2S, si attiva quando il filamento separa gli ingranaggi dell'estrusore Bondtech e il braccio tendicinghia viene spinto nel sensore.

Related articles

Failing Z calibration (MK3S/MK2.5S)

Failing Z calibration (MK3S/MK2.5S)

The size of the extruder and the length of travel of the Z-axis is coded into the firmware. Therefore, if the assembly of the extruder, or the firmware for your extruder, is not…

How to replace a heatbreak/heaterblock/heatsink (MK3/MK2.5)

How to replace a heatbreak/heaterblock/heatsink (MK3/MK2.5)

Err: PRINT FAN ERROR

Err: PRINT FAN ERROR

PRINT FAN ERROR error message occurs when the print fan (the one at the front of the extruder) does not receive any RPM (Revolutions per Minute) readings. This can be caused by…

IR Filament sensor detection (MK3S)

IR Filament sensor detection (MK3S)

With filament sensor detection, the printer will be able to recognize if the connection with the sensor was interrupted (e.g. broken wire or disconnected cable) and take appropriate…

9. First flight

9. First flight

8. Preflight check & Calibration

8. Preflight check & Calibration

G-code preparation for MMU2S

G-code preparation for MMU2S