FR
  • English
Se Connecter

Puppy error #17522 (XL)

Menu
Pertinent pour:
Dernière mise à jour a year ago
Cette article est également disponible dans les langues suivantes : 
EN

What happened?

On the Original Prusa XL, communication with the peripheral boards (e.g. Dwarf board) is achieved using the MODBUS protocol. In MODBUS, there are two types of devices: the master and the slave, also known, respectively, as client and server. On Original Prusa XL firmware, the master is the XLBuddy, and each slave is called puppy

If one of the puppies does not respond to a request from XLBuddy within a specified time period, the printer will show the message: "Waiting for puppies to start timed out".

Error name: Puppy run timeout

Error code: #17522

The error most likely indicates a disconnection or fault with a cable connected to a peripheral board, that happened during a printer operation. 

How to fix it?

A visual inspection

Before accessing any of the electronic boards, ensure that the printer is fully cooled down, and switched off for at least 10 minutes

Inspect the wiring between the Sandwich board and the indicated puppy board for a cable positioned into an incorrect port, a loose connection, or a visibly broken cable. 

Re-flash firmware

Download the firmware and if necessary the bootloader, and transfer it to your USB drive. Make sure to unmount the drive from your operating system before physically removing it.

Insert the USB drive back into the printer and reboot the printer using the reset button directly next to the knob to initiate the flashing procedure. In case the procedure does not start, reboot the printer again by pressing the same reset button, and while the printer is booting up, press once the rotating knob.

Are you still having issues? Contact our support team and let them know that you tried to fix the issue with these instructions. We will take it from there.

Cet article vous a-t-il été utile ?

Commentaires

Vous avez encore des questions ?

Vous avez encore des questions ?

Si vous avez une question sur un sujet qui n'est pas traité ici, consultez nos ressources supplémentaires.
Et si cela ne suffit pas, vous pouvez envoyer une demande à [email protected] ou via le bouton ci-dessous.

Nous contacter