EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

Resin measuring failed #10124 (SL1/SL1S)

Relevant for:
Last updated a year ago
This article is also available in following languages: 
CSDEESFRITPL

What happened?

The printer is displaying the message: Measuring the resin failed. Check the presence of the platform and the amount of resin in the tank.

Error name: Resin measuring failed

Error code: #10124

This error happens when the printer measures 0 ml of resin in the vat before starting the print.

How to fix it?

Check if there is enough resin in the tank, and that the tank is firmly tightened by the side screws. While the printer is performing this check, do not touch the printer.

If no issues are found in the tank, check the resin sensor cable by opening the bottom cover.

 

 

 

On the side with the electronics boards from the printer, check if the serrated washer is in contact with the surface of the tilt, the cable is not damaged, and the connector is firmly connected to the board.

Was this article helpful?

Comments

Please sign in before adding a comment.

Related

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to info@prusa3d.com or through the button below.