Resin too high
#10109 (SL1/SL1S)
Relevant for
SL1
SL1S SPEED
Article is also available in following languages
Relevant for
The printer is displaying the message: Measured resin volume [amount] ml is higher than required for this print. Make sure that the resin level does not exceed the 100% mark and restart the print.
Error name: Resin too high
Error code: #10109
Issued when the resin level is too high and needs some resin needs to be removed before the print.
If the print starts, the tank movements might spill the resin to the parts below. Pour some of the resin back into the bottle through a filter until you have just the amount of resin required for the print.
If the resin spills from the tank please clean as much as possible with a paper towel and contact our Customer support.