EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

Boost board problem #10320 (SL1S)

Relevant for:
Last updated 4 months ago
This article is also available in following languages: 
CSDEESFRITPL

What happened?

The printer is displaying the message: Communication with the Boost board failed. Check the connection and restart the printer.

Error name: Boost board problem

Error code: #10320

This error happens when the Boost board is not found by the printer.

How to fix it?

Make sure that you have firmware 1.6.6 or newer installed. Some versions of the Boost board will not work with an older firmware.

Check the cable connection of the Boost A64 cable (indicated by a green arrow) and the Boost Motion cable (indicated by a blue arrow) to the Boost board and to the Motion controller board.

Boost board and its connections.

Boost A64 cable connected to the A64 logic board.Boost Motion cable connected to the Motion controller board.
If the cables are connected but the error persists, the Boost board might be damaged.
Was this article helpful?
This action is available only to registered users. Please log-in.

Comments

Please sign in before adding a comment.

Related

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to info@prusa3d.com or through the button below.