The printer is displaying the message: The amount of resin in the tank is not enough for the current project. Adding more resin will be required during the print.
Error name: Not enough resin
Error code: #10706
When the SL1 shows this warning, starting the print is possible, but you may need to add more resin during the print. Note that stopping for a long time during the print may cause printing errors. It is recommended to fill the resin tank by the amount requested at the start of the print so the pause is not necessary.
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.