Prusa CORE One+ | Prusa Knowledge Base

Prusa CORE One+ Unpacking & First run

Assemble the Prusa CORE One+

Upgrade from MK4S to CORE One+

Upgrade from CORE One to CORE One+

Prusa CORE One to CORE One+ upgrade (community version)

This article guides you through the community version of the Prusa CORE One to the Prusa CORE One+ upgrade. It lists all the components required for the upgrade and provides instructions…

Getting started with Prusa CORE One+

First print with PrusaSlicer

If you are using PrusaSlicer for the first time to generate a gcode or bgcode for printing, you can follow the steps below. Click on the links to get more information about the…

Prusa Connect and PrusaLink explained

Prusa Connect and PrusaLink are two remote printing solutions developed in-house by Prusa. Its origin is in the management system used in our record-sized print farm located in…

How to update firmware (CORE One L, CORE One, MK4/S, MK3.9/S, MK3.5/S, XL)

On the Prusa CORE One L, Prusa CORE One/+, Original Prusa MK4/S, MK3.9/S, MK3.5/S, and XL, the firmware is flashed using a USB flash drive. This is valid for all ways of firmware…