This chapter will guide you through calibrating and preparing the printer for its first run. Starting with tensioning the belts:
⬢The left screw adjusts the upper belt.
⬢The right screw adjusts the lower belt.
⬢Double-check that the M3x30 screws in the belt tensioners were lubricated during assembly.
WARNING: Incorrect procedure may result in damage to plastic parts or seizing of screws. Before adjusting the belt tension, read the dedicated article:
kdo mate Gen2, krome natazeni remenu nezapomente po zapnuti tiskarny nastavit v menu - HW: G1.5 belts -> enabled, defaultne jsem to mel vypnute a tiskarna na osach X a Y tiskla o 2% mensi vytisky. Po enablovani uz tiskne spravne.
