Sonde P.I.N.D.A.

La sonde Prusa INDuction Autoleveling, est un composant essentiel facilitant la calibration de nos imprimantes. Il existe 2 versions différentes : V1, utilisée sur les MK2/S et V2, utilisée sur les MK2.5, MK2.5S, MK3 et MK3S. La différence est que le V2 a une thermistance intégrée pour compenser la différence entre les mesures à froid et à chaud. Les V1 et V2 ne sont pas interchangeables.

Temperature Calibration

All induction proximity probes alter the sensing distance with increased temperature. This might affect the quality of the first printed layer. P.I.N.D.A. v2 probe, included in…

Lire l'article

First Layer Calibration (i3)

The First Layer Calibration is used to calibrate the distance between the tip of the nozzle and the print surface. The aim is to adjust the nozzle height until the extruded plastic…

Lire l'article

XYZ Calibration (MK3/MK3S/MK3S+)

The XYZ calibration is a process, which checks, whether the printer was assembled correctly and the axes are perpendicular to each other. It measures the skew of your X/Y axis…

Lire l'article

Nozzle crashed into the heatbed

If this occurs it indicates a problem with the P.I.N.D.A. or SuperPINDA sensor. P.I.N.D.A. stands for Prusa INDuction Auto leveling. It is the Z-axis end-stop on the MK2/S and…

Lire l'article

Misaligned PINDA Sensor (MK2/S)

A misaligned P.I.N.D.A. Sensor is an issue that can be fixed by fine-tuning the printer. To do that, you need to calibrate the P.I.N.D.A. sensor position on multiple spots around…

Lire l'article

P.I.N.D.A./SuperPINDA Sensor testing

P.I.N.D.A. stands for Prusa INDuction Autoleveling sensor and is a vital component facilitating the calibration of our printers. There are 3 different versions: P.I.N.D.A. V1…

Lire l'article