Changes in 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Changes in 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Changes in 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Changes in 8.0.0
M204 F parameter limits the filament flow accelerationC: in temperature reports [7.0.0]M92 and M350 not resetting phase stepping [6.9.0]Changes in 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Changes in 1.01
Correction of product information
Minor content updates
Changes in 8.0.2 (3.0.4) CORE one L, CORE One L+
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Changes in 1.03
Changes in 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Changes in 1.09
Changes in 1.3.56
New features:
Fixed Bugs:
Documents:
Changes in 1.01
Changes in 1.8.0
Changes in 1.08
Changes in 3.3.0
Changes in 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Changes in 1.06
Added information for Critical Infrastructure
Changes in 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Changes in 1.01
Added information for Critical Infrastructure
Changes in 1.01
Changes in 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Changes in 1.01
Correction of product information
Minor content updates
Changes in 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Changes in 1.01
Correction of product information
Minor content updates
Changes in 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Changes in 1.03
Updated with instructions for MK3.9 upgrade
Changes in 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Changes in 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Changes in 3.14.1
utils/build.py to be able to compile the firmwareChanges in 3.14.1 (3.0.3)
utils/build.py to be able to compile the firmwareChanges in 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Changes in 1.09
Changes in 3.14.1
utils/build.py to be able to compile the firmwareChanges in 1.8.0
Changes in 1.05
Changes in 3.14.1
utils/build.py to be able to compile the firmwareChanges in 2.62
Changes in 3.3.0
Changes in 1.01
Changes in 3.14.1
utils/build.py to be able to compile the firmwareChanges in 3.04
Changes in 3.14.1
utils/build.py to be able to compile the firmwareChanges in 2.51
Changes in 3.2.3
Changes in 1.0
Changes in 3.2.3
Changes in 2.02
Changes in 3.0.12
Changes in 1.01
Manual is suitable even for 3mm version except material temperatures and images.