Prusa Signature Oak | Prusa Knowledge Base

Prusa Signature Oak Unboxing & First run

Getting started with Prusa Signature Oak

First print with PrusaSlicer

If you are using PrusaSlicer for the first time to generate a gcode or bgcode for printing, you can follow the steps below. Click on the links to get more information about the…

Signature Oak profile in PrusaSlicer (2.9.4 and newer)

The Signature Oak print profile is available in PrusaSlicer 2.9.4 and newer. If you do not see Signature Oak in your printer list, it is most likely due to an outdated PrusaSlicer…

Prusa Connect and PrusaLink explained

Prusa Connect and PrusaLink are two remote printing solutions developed in-house by Prusa. Its origin is in the management system used in our record-sized print farm located in…

Caring for your Signature Oak

Regular printer maintenance (Signature Oak)

The Prusa Signature Oak was designed from the beginning as a true print "workhorse". Despite its high reliability, it is still a device with mechanical components that require…

Care and maintenance of wooden parts (Prusa Signature Oak)

The Prusa Signature Oak is a unique edition of the 3D printer featuring structural components made from solid oak wood. As a natural material, wood is susceptible to environmental…

Fix common issues

Changing or replacing the Prusa Nozzle

Replacing the Prusa Nozzle on your printer varies depending on the model of your printer. This article provides an overview of the different methods to replace the Prusa Nozzle,…

Selftest failed (CORE One/+)

On the Prusa CORE One/+, the selftest checks for issues in the printer's assembly, wiring, and electronic components. It is the first part of the Calibration Wizard, which is prompted…