- New features
- Filament color – stored with the loaded filament, asked on load and shown in the menus [7.0.0]
- New Runout Reaction setting (Delayed / Instant) [7.0.0]
- New PVA and BVOH filament presets [7.0.0]
- New parameter limits the filament flow acceleration
- Changes and improvements
- Uneven bed detected during mesh bed leveling is now aligned automatically [7.0.0]
- Bed now parks 50 mm above its lowest position when a print ends, is stopped or paused [6.9.0]
- Chamber vents now close automatically at the end of a print [6.9.0]
- Tune menu reorganized: new Temperature & Fans, Lights and Language & Time submenus [6.9.0]
- Stuck filament dialog now offers Ignore and Disable [6.9.0]
- Flexible filaments now load, unload and purge three times faster
- Filament usage and Move E now work in real filament length
- New Filament Sensor Not Ready warning replaces a misleading load timeout
- Filament change now preheats the nozzle for the loaded filament instead of aborting [7.0.0]
- Faster and more reliable connection to Prusa Connect during printing
- Prusa Connect now receives per-tool material, spool and consumption data
- PrusaLink file downloads now keep the full file name [7.0.0]
- Error screens now show the printer model instead of the device hash
- Red screen errors now also store a crash dump [6.9.0]
- Filament sensor selftest now reports a disconnected sensor [6.9.0]
- Resetting HW Configuration in the factory reset now also resets calibrations [6.9.0]
- Chamber temperature is now reported as in temperature reports [7.0.0]
- Printer now warns when a G-code line sent over serial is too long [7.0.0]
- Improved homing reliability [6.9.1]
- Network and file handling hardened against malformed input [7.0.0]
- Fixes
- Fixed wrong remaining time after a power panic recovery [6.9.0]
- Fixed a blob left on the print after a power panic [6.9.0]
- Fixed settings being lost after a power panic [6.10.0]
- Fixed false fan not spinning warnings when fan autocontrol is disabled [7.0.0]
- Fixed filament auto-retract running with a cold nozzle [6.9.0]
- Fixed custom filament parameters being overwritten when a purge fails during filament change [7.0.0]
- Fixed the print screen getting stuck when a print is stopped while finishing [6.10.0]
- Fixed crash recovery getting stuck when no move follows [7.0.0]
- Fixed and not resetting phase stepping [6.9.0]
- Fixed possible crashes in the file browser, QR code prompts, USB handling and at the end of a PrusaLink transfer [7.0.0]
- Fixed the display not recovering on error screens [7.0.0]