Čeština
Italiano
Deutsch
Polski
Français

Sample G-codes

Relevant for:

MK2.5 MK2.5S MK3 MK3S MMU2S SL1 MINI MK3S+MINI+SL1S XL MK4 MMU3 MK3.9 MK3.5

Last updated 3 months ago

This article is also available in following languages:

Each Original Prusa printer is shipped with a bundle of sample G-codes. These G-codes are tested and tailored specifically for your printer model and can be used either to see the printer capabilities or for troubleshooting.

Find your printer in the table and download the zip archive. Both the model geometry (.stl/.3mf) and the presliced version (.gcode) are included.

Printer model	Printer type	3D models	G-codes
Original Prusa MK4/MK3.9	FFF	link	link*
Original Prusa MK3.5	FFF	TBA	TBA
Original Prusa MK3S+	FFF	link	link
Original Prusa MK3S	FFF	link	link
Original Prusa MK3	FFF	link	link
Original Prusa MK2.5S	FFF	TBA	TBA
Original Prusa MK2.5	FFF	TBA	TBA
Original Prusa MINI+	FFF	link	link
Original Prusa MINI	FFF	link	link
Original Prusa XL 1T	FFF	link	link
Original Prusa XL 2T	FFF	link	link
Original Prusa XL 5T	FFF	link	link
Original Prusa MMU3	FFF	link	link
Original Prusa MMU2S & MK3S/+	FFF	link	link
Original Prusa MMU2S & MK2.5S	FFF	link	link
Original Prusa MMU2 & MK3	FFF	link	link
Original Prusa MMU2 & MK2.5	FFF	link	link
Original Prusa MMU1 & MK2	FFF	link	link
Original Prusa SL1S	MSLA	link	link
Original Prusa SL1	MSLA	link	link

*The archive includes G-codes for both MK4 and MK3.9 printers. G-codes are sliced for Input Shaper and older non-Input Shaper firmware. To print the Input Shaper G-codes, please make sure your printer is running firmware 5.0.0 or newer.

Was this article helpful?

Easy to understand

Solved my problem

Other reason

Comments

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.