EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
  • 日本語
Login

Heatbreak MINTEMP Error #13211 (MK4) #21211 (MK3.9)

Menu
Relevant for:
Last updated 7 hours ago
This article is also available in following languages: 
CSPLDEESITFRJA

What happened?

The printer is showing the message "Check the heatbreak thermistor wiring for possible damage."

Error name: Heatbreak MINTEMP Error

Error code: #13211 (MK4) #21211 (MK3.9)

The error is shown when the heatbreak thermistor drops below 5 ºC at any point.

How to fix it?

Access the LoveBoard. Check if the thermistor is connected correctly and if there is no damage along the cable length.

If you have a multimeter, it is possible to check the resistance of the cables to verify if they are damaged. For that, use our Multimeter usage guide.

 

Was this article helpful?

Comments

0
Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us