JA
  • English
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

XY position invalid #17106 (XL)

Menu
Relevant for:
Last updated 9 months ago
This article is also available in following languages: 
ENPLDEITFR

What happened? 

During XY probing, part of the Tool Offset calibration, if the offset in one of the tools is out of a range of acceptable values, the printer will show the message "Probed XY position is # mm from expected. This is more than allowed difference of # mm". The values in mm will be shown instead of the symbol #. This error prevents a tool collision with neighboring parts of the printer. 

Error name: XY position invalid

Error code: #17106

How to fix it? 

Nozzle

Ensure that the nozzle is correctly positioned in the Nextruder, tightened against the Nube if you are using a Prusa Adapter and that it is as clean as possible from any residue. Also, ensure that the nozzle is not bent. 

Collision with the calibration pin key

If the nozzle crashes onto the calibration pin key, it can trigger the error. Ensure that the dock is not loose and that it is not between the locked and unlocked positions. 

Was this article helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us