English

Modular bed error #17302 (XL)

Relevant for:

Last updated 2 years ago

This article is also available in following languages:

What happened?

The printer is showing the message: "Overcurrent detected".

Error name: MB overcurrent

Error code: #17302

An LED on the Modular Bed lights up when this error occurs. The error indicates an issue with the control of the current flowing into the Modular Bed and its heatbed tiles.

How to fix it?

A visual inspection

Before accessing any of the electronic boards, ensure that the printer is fully cooled down, and switched off for at least 10 minutes.

Inspect the wiring between the Sandwich board and the Modular Bed for a loose connection, or a broken cable.

Inspect the modular bed for physical damage, such as scratches on any of the heatbed tiles surface.

In case of any further doubts, do not hesitate to contact our customer support.

Was this article helpful?

Easy to understand

Solved my problem

Other reason

Comments

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.