Sensor P.I.N.D.A.

Sensor Prusa INDuction Autoleveling, es un componente vital que facilita la calibración de nuestras impresoras. Hay 2 versiones diferentes: V1, utilizada en la MK2/S, y V2, utilizada en las MK2.5, MK2.5S, MK3 y MK3S. La diferencia es que el V2 tiene un termistor incorporado para compensar la diferencia en las mediciones de frío y calor. Las V1 y V2 no son intercambiables.

Temperature Calibration

All induction proximity probes alter the sensing distance with increased temperature. This might affect the quality of the first printed layer. P.I.N.D.A. v2 probe, included in…

First Layer Calibration (i3)

The First Layer Calibration is used to calibrate the distance between the tip of the nozzle and the print surface. The aim is to adjust the nozzle height until the extruded plastic…

XYZ Calibration (MK3/MK3S/MK3S+)

The XYZ calibration is a process, which checks, whether the printer was assembled correctly and the axes are perpendicular to each other. It measures the skew of your X/Y axis…

Nozzle crashed into the heatbed

If this occurs it indicates a problem with the P.I.N.D.A. or SuperPINDA sensor. P.I.N.D.A. stands for Prusa INDuction Auto leveling. It is the Z-axis end-stop on the MK2/S and…

Misaligned PINDA Sensor (MK2/S)

A misaligned P.I.N.D.A. Sensor is an issue that can be fixed by fine-tuning the printer. To do that, you need to calibrate the P.I.N.D.A. sensor position on multiple spots around…

P.I.N.D.A./SuperPINDA Sensor testing

P.I.N.D.A. stands for Prusa INDuction Autoleveling sensor and is a vital component facilitating the calibration of our printers. There are 3 different versions: P.I.N.D.A. V1…

Related articles