Buffer de filamento

Organizador de filamentos montado en la base de la impresora. El buffer evita que los filamentos se enreden al tener una capa/compartimento separado de cada uno de ellos. También evita que la bobina se desenrolle una vez que el filamento
se retira de la boquilla a la unidad MMU2S.

PETG Tungsten

Prusament PETG Tungsten 75% is a high-density material containing 75% tungsten powder. This non-reactive, hypoallergenic, and non-toxic filament is designed primarily for printing…

ASA

Basic info ASA is a technical material suitable for outdoor use, due to its high UV light and temperature resistance. Unlike other materials that are soluble in more dangerous…

ABS

Basic info Due to its high tenacity and temperature resistance, ABS is a technical material suitable for printing mechanically stressed parts. Its surface can be smoothed with…

PETG

Basic info PETG is one of the most easily printable materials, it is inexpensive and suitable for beginners. Relatively high tenacity and temperature resistance make it suitable…

PLA

Basic info PLA is one of the easiest materials to print. It is inexpensive and suitable (not only) for beginners. It’s usually used for printing detailed models, figures, and…

Related articles

PETG Tungsten

ASA

ABS

PETG

PLA

9. First flight

8. Preflight check & Calibration

G-code preparation for MMU2S