Modifiche nella 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Modifiche nella 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Modifiche nella 8.0.2
Modifiche nella 1.02
Contenuti aggiornati per CORE One+
Modifiche nella 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Modifiche nella 8.0.0
parametro M204 F limita l’accelerazione del flusso del filamentoC: nei rapporti sulla temperatura [7.0.0]M92 e M350 non azzeravano la Phase Stepping [6.9.0]Modifiche nella 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Modifiche nella 1.01
Correzione delle informazioni sul prodotto
Aggiornamenti minori dei contenuti
Modifiche nella 8.0.2 (3.0.4) CORE one L, CORE One L+
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Modifiche nella 1.03
Modifiche nella 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Modifiche nella 1.09
Modifiche nella 1.3.56
Novità:
Bug risolti:
Documenti:
Modifiche nella 1.01
Modifiche nella 1.8.0
Modifiche nella 1.08
Modifiche nella 3.3.0
Modifiche nella 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Modifiche nella 1.06
Sono state aggiunte informazioni per Critical Infrastructure
Modifiche nella 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Modifiche nella 1.01
Sono state aggiunte informazioni per Critical Infrastructure
Modifiche nella 8.0.2
Modifiche nella 1.01
Modifiche nella 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Modifiche nella 1.01
Correzione delle informazioni sul prodotto
Aggiornamenti minori dei contenuti
Modifiche nella 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Modifiche nella 1.01
Correzione delle informazioni sul prodotto
Aggiornamenti minori dei contenuti
Modifiche nella 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Modifiche nella 1.03
Aggiornato con le istruzioni per l'aggiornamento a MK3.9
Modifiche nella 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Modifiche nella 1.03
Aggiornato con le istruzioni per l'aggiornamento a MK3.9
Modifiche nella 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Modifiche nella 3.14.1
utils/build.py per poter compilare il firmwareModifiche nella 3.17
Modifiche nella 3.14.1 (3.0.3)
utils/build.py per poter compilare il firmwareModifiche nella 1.2
Modifiche nella 8.0.2
This is the stable release of firmware 8.0.2 for the Prusa CORE One L+, CORE One L, CORE One+ (Gen 2) INDX, CORE One INDX, CORE One+ (Gen 2), CORE One, XL+, XL, MK4S, MK4, MK3.9S, MK3.9, MK3.5S, MK3.5, MINI+ and MINI, introducing a manual Printer Type setting for the XL+ and XL – along with targeted stability and security fixes. It also contains the fixes of firmware 8.0.1, which was released for the XL+, XL, MINI+ and MINI only. For a complete overview of the features introduced in 8.0.0, users can refer to its release notes.
Modifiche nella 1.09
Modifiche nella 3.14.1
utils/build.py per poter compilare il firmwareModifiche nella 3.17
Modifiche nella 1.8.0
Modifiche nella 1.05
Modifiche nella 3.14.1
utils/build.py per poter compilare il firmwareModifiche nella 2.62
Modifiche nella 3.3.0
Modifiche nella 1.01
Modifiche nella 3.14.1
utils/build.py per poter compilare il firmwareModifiche nella 3.04
Modifiche nella 3.14.1
utils/build.py per poter compilare il firmwareModifiche nella 2.51
Modifiche nella 3.2.3
Modifiche nella 1.0
Modifiche nella 3.2.3
Modifiche nella 2.02
Modifiche nella 3.0.12
Modifiche nella 1.01
Manual is suitable even for 3mm version except material temperatures and images.