EN
Login- Čeština
- Español
- Italiano
- Deutsch
- Polski
- Français
- Home
- Calibration
- Calibration Error Messages
- Calibration error #10113 (SL1/SL1S)
Calibration error #10113 (SL1/SL1S)
Menu
- Basic calibration
- Advanced calibration
- Calibration Error Messages
- Hostname error #10536 (SL1/SL1S)
- UV LED calibrator readings error #10315 (SL1)
- UV LED calibrator error #10314 (SL1)
- UV LED calibrator connection error #10312 (SL1)
- UV LED calibrator link error #10313 (SL1)
- Wizard data failure #10526 (SL1/SL1S)
- UV calibration error #10319 (SL1)
- No UV calibration data #10532 (SL1)
- UV data error #10533 (SL1)
- Display usage error #10535 (SL1)
- UV LED heatsink overheating #10206 (SL1)
- UV LED calibrator not detected #10311 (SL1)
- Data overwrite failed #10530 (SL1/SL1S)
- Calibration load failed #10524 (SL1)
- Serial number error #10527 (SL1/SL1S)
- An unexpected error has occurred #10701 (SL1)
- Data preparation failure #10525 (SL1/SL1S)
- Printer Variant Mismatch #10711 (SL1/SL1S)
- Calibration error #10113 (SL1/SL1S)
- What happened?
- How to fix it?
- Tower moving failed #10103 (SL1/SL1S)
- Tower position error #10123 (SL1/SL1S)
- UV intensity too high #10317 (SL1/SL1S)
- This Wizard cannot be canceled #10522 (SL1/SL1S)
- Cannot set update channel #10513 (SL1/SL1S)
- Boot slot changed #10601 (SL1/SL1S)
- Fan RPM not in range #10122 (SL1/SL1S)
- UV intensity too low #10318 (SL1/SL1S)
- Printer is not UV calibrated #10308 (SL1)
- Speaker test failed #10310 (SL1/SL1S)
- Tower endstop not reached #10114 (SL1/SL1S)
- Internal error (DBUS mapping failed) #10507 (SL1/SL1S)
- Tilt position invalid #10121 (SL1)
- Tilt check failed #10119 (SL1/SL1S)
- Tilt endstop not reached #10115 (SL1/SL1S)
- Tower homing failed #10102 (SL1/SL1S)
- Tilt homing failed #10101 (SL1/SL1S)
- SL1 Tilt-mechanism error
- QR Error codes
This article is also available in following languages: 
What happened?
The printer is displaying the message: The printer is not calibrated. Please run the Wizard first.
Error name: Not mechanically calibrated
Error code: #10113
Issued when the printer has not been calibrated before a print.
How to fix it?
Go in the printer menu to LCD menu -> Settings -> Calibration -> Printer Calibration. Follow the instructions on the screen, and remember that you can swipe the screen to see example pictures of each step of the calibration.
Was this article helpful?
This action is available only to registered users. Please log-in.
Comments
Please sign in before adding a comment.
Related
Still have questions?
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to info@prusa3d.com or through the button below.