The printer displaying the message: The printer is not UV calibrated, please connect the UV calibrator and run the procedure.
Error name: Printer is not UV calibrated
Error code: #10308
When replacing the print display or A64 logic board, you must calibrate the UV LEDs using the calibrator. This error can also occur if the calibration process failed or was aborted. The calibration process is part of the replacement guide.
How to replace the print display (SL1)
How to replace the A64 board (SL1)
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.