ファームウェアとダウンロード
PrusaSlicer 2.9.4
2025-11-07T00:00:00+00:00
変更 2.9.4
- Junction Deviation Integration
- Improved Time Estimation
Firmware 6.5.2
2026-01-19T00:00:00+00:00
変更 6.5.2
- Fixed nozzle cleaning failed
- Improved PSU fan checks
- Improved AC Bed sensitivity to voltage fluctuations
This is the stable release of firmware 6.5.2 for the CORE One L, addressing several improvements and bug fixes, most notably false positive "Nozzle cleaning failed" errors.
Firmware 6.4.0
2025-11-25T00:00:00+00:00
変更 6.4.0
- New features
- Automatic chamber vent opening/closing (C1/+)
- Belt tuning wizard (C1/+)
- Faster and more responsive Prusa Connect experience
- Nozzle cleaning failed wizard
- Auto-retract (MK4 family, XL)
- Auto-retract improvements (C1/+)
- Auto-retract disable option (C1/+)
- Selective factory reset
- Chamber support for backwards G-Code compatibility (C1/+)
- Changes and improvements
- Improved print status messages
- Lazier homing, more cautious calibration
- Autoload improvements
- Unified XL & CORE One chamber filtration
- Option to continue after nozzle cleaning failure
- Print sheet detection (MK4 family)
- Respect maximum printed Z position
- Gearbox alignment calibration (XL)
- Filament change from Tune menu in any tool (XL)
- Support cancelling more objects
- Wi-Fi signal strength indicator
- BSOD knob press behavior
- Reworked filament sensor evaluation
- Ukrainian language support for all printers
- Fixes
- All the fixes from the 6.3.X releases have been expanded to other printers.
- Various fixes and stability improvements
Firmware 6.4.0
2025-11-25T00:00:00+00:00
変更 6.4.0
- New features
- Automatic chamber vent opening/closing (C1/+)
- Belt tuning wizard (C1/+)
- Faster and more responsive Prusa Connect experience
- Nozzle cleaning failed wizard
- Auto-retract (MK4 family, XL)
- Auto-retract improvements (C1/+)
- Auto-retract disable option (C1/+)
- Selective factory reset
- Chamber support for backwards G-Code compatibility (C1/+)
- Changes and improvements
- Improved print status messages
- Lazier homing, more cautious calibration
- Autoload improvements
- Unified XL & CORE One chamber filtration
- Option to continue after nozzle cleaning failure
- Print sheet detection (MK4 family)
- Respect maximum printed Z position
- Gearbox alignment calibration (XL)
- Filament change from Tune menu in any tool (XL)
- Support cancelling more objects
- Wi-Fi signal strength indicator
- BSOD knob press behavior
- Reworked filament sensor evaluation
- Ukrainian language support for all printers
- Fixes
- All the fixes from the 6.3.X releases have been expanded to other printers.
- Various fixes and stability improvements
Handbook 1.01
2025-03-20T00:00:00+00:00
変更 1.01
- Instructions for installing anti-vibration bars
Firmware 6.4.0
2025-11-25T00:00:00+00:00
変更 6.4.0
- New features
- Automatic chamber vent opening/closing (C1/+)
- Belt tuning wizard (C1/+)
- Faster and more responsive Prusa Connect experience
- Nozzle cleaning failed wizard
- Auto-retract (MK4 family, XL)
- Auto-retract improvements (C1/+)
- Auto-retract disable option (C1/+)
- Selective factory reset
- Chamber support for backwards G-Code compatibility (C1/+)
- Changes and improvements
- Improved print status messages
- Lazier homing, more cautious calibration
- Autoload improvements
- Unified XL & CORE One chamber filtration
- Option to continue after nozzle cleaning failure
- Print sheet detection (MK4 family)
- Respect maximum printed Z position
- Gearbox alignment calibration (XL)
- Filament change from Tune menu in any tool (XL)
- Support cancelling more objects
- Wi-Fi signal strength indicator
- BSOD knob press behavior
- Reworked filament sensor evaluation
- Ukrainian language support for all printers
- Fixes
- All the fixes from the 6.3.X releases have been expanded to other printers.
- Various fixes and stability improvements
Handbook 1.01
2024-10-23T00:00:00+00:00
変更 1.01
Correction of product information
Minor content updates
Handbook 1.03
2025-06-11T00:00:00+00:00
変更 1.03
- Includes instructions for Prusa CORE One
- Added instructions for initial setup
Firmware 6.4.0
2025-11-25T00:00:00+00:00
変更 6.4.0
- New features
- Automatic chamber vent opening/closing (C1/+)
- Belt tuning wizard (C1/+)
- Faster and more responsive Prusa Connect experience
- Nozzle cleaning failed wizard
- Auto-retract (MK4 family, XL)
- Auto-retract improvements (C1/+)
- Auto-retract disable option (C1/+)
- Selective factory reset
- Chamber support for backwards G-Code compatibility (C1/+)
- Changes and improvements
- Improved print status messages
- Lazier homing, more cautious calibration
- Autoload improvements
- Unified XL & CORE One chamber filtration
- Option to continue after nozzle cleaning failure
- Print sheet detection (MK4 family)
- Respect maximum printed Z position
- Gearbox alignment calibration (XL)
- Filament change from Tune menu in any tool (XL)
- Support cancelling more objects
- Wi-Fi signal strength indicator
- BSOD knob press behavior
- Reworked filament sensor evaluation
- Ukrainian language support for all printers
- Fixes
- All the fixes from the 6.3.X releases have been expanded to other printers.
- Various fixes and stability improvements
Handbook 1.05
2025-08-21T00:00:00+00:00
変更 1.05
- Updated information about Prusa Connect and Prusa App
- Updated description of package contents and selftest duration
- Updated instructions for loading filament with multiple tools
Firmware 1.8.0
2025-03-11T00:00:00+00:00
変更 1.8.0
- Support for Prusa Connect
- Custom print profiles
- Updated PrusaLink Web
- Exposure time limits
- Reworked handling of USB flash drives
- API key support dropped
- Other improvements
- Bug fixes
- Known issues
Firmware 3.3.0
2023-05-16T00:00:00+00:00
変更 3.3.0
- Extend all timers to 255 minutes
- IPA Filtering (new feature)
- Wash cycles (new feature)
- New heating algorithm
- Automatic fans control
- Factory reset option
- Improved self-test
- Bugfixes
Firmware 1.3.19
2025-09-30T00:00:00+00:00
変更 1.3.19
New features:
- Linear rails maintenance interval check
Fixed bugs:
- Prusa Connect print thumbnail display fix
Handbook 1.01
2025-05-05T00:00:00+00:00
変更 1.01
- Updated specification of OHS (Occupational Health and Safety)
- Updated description of package contents
- Updated maintenance section
Firmware 6.4.0
2025-11-25T00:00:00+00:00
変更 6.4.0
- New features
- Automatic chamber vent opening/closing (C1/+)
- Belt tuning wizard (C1/+)
- Faster and more responsive Prusa Connect experience
- Nozzle cleaning failed wizard
- Auto-retract (MK4 family, XL)
- Auto-retract improvements (C1/+)
- Auto-retract disable option (C1/+)
- Selective factory reset
- Chamber support for backwards G-Code compatibility (C1/+)
- Changes and improvements
- Improved print status messages
- Lazier homing, more cautious calibration
- Autoload improvements
- Unified XL & CORE One chamber filtration
- Option to continue after nozzle cleaning failure
- Print sheet detection (MK4 family)
- Respect maximum printed Z position
- Gearbox alignment calibration (XL)
- Filament change from Tune menu in any tool (XL)
- Support cancelling more objects
- Wi-Fi signal strength indicator
- BSOD knob press behavior
- Reworked filament sensor evaluation
- Ukrainian language support for all printers
- Fixes
- All the fixes from the 6.3.X releases have been expanded to other printers.
- Various fixes and stability improvements
Handbook 1.11
2023-11-10T00:00:00+00:00
変更 1.11
- Wi-Fi auto-reconnect fixed
- Improved Wi-Fi (ESP) flashing
- RTC fixed
- Additional hotend protection
- UI fixes
- New error code URL
- Improved bootstrap
- Known issues
Firmware 6.4.0
2025-11-25T00:00:00+00:00
変更 6.4.0
- New features
- Automatic chamber vent opening/closing (C1/+)
- Belt tuning wizard (C1/+)
- Faster and more responsive Prusa Connect experience
- Nozzle cleaning failed wizard
- Auto-retract (MK4 family, XL)
- Auto-retract improvements (C1/+)
- Auto-retract disable option (C1/+)
- Selective factory reset
- Chamber support for backwards G-Code compatibility (C1/+)
- Changes and improvements
- Improved print status messages
- Lazier homing, more cautious calibration
- Autoload improvements
- Unified XL & CORE One chamber filtration
- Option to continue after nozzle cleaning failure
- Print sheet detection (MK4 family)
- Respect maximum printed Z position
- Gearbox alignment calibration (XL)
- Filament change from Tune menu in any tool (XL)
- Support cancelling more objects
- Wi-Fi signal strength indicator
- BSOD knob press behavior
- Reworked filament sensor evaluation
- Ukrainian language support for all printers
- Fixes
- All the fixes from the 6.3.X releases have been expanded to other printers.
- Various fixes and stability improvements
Handbook 1.01
2024-10-23T00:00:00+00:00
変更 1.01
Correction of product information
Minor content updates
Firmware 6.4.0
2025-11-25T00:00:00+00:00
変更 6.4.0
- New features
- Automatic chamber vent opening/closing (C1/+)
- Belt tuning wizard (C1/+)
- Faster and more responsive Prusa Connect experience
- Nozzle cleaning failed wizard
- Auto-retract (MK4 family, XL)
- Auto-retract improvements (C1/+)
- Auto-retract disable option (C1/+)
- Selective factory reset
- Chamber support for backwards G-Code compatibility (C1/+)
- Changes and improvements
- Improved print status messages
- Lazier homing, more cautious calibration
- Autoload improvements
- Unified XL & CORE One chamber filtration
- Option to continue after nozzle cleaning failure
- Print sheet detection (MK4 family)
- Respect maximum printed Z position
- Gearbox alignment calibration (XL)
- Filament change from Tune menu in any tool (XL)
- Support cancelling more objects
- Wi-Fi signal strength indicator
- BSOD knob press behavior
- Reworked filament sensor evaluation
- Ukrainian language support for all printers
- Fixes
- All the fixes from the 6.3.X releases have been expanded to other printers.
- Various fixes and stability improvements
Handbook 1.01
2024-10-23T00:00:00+00:00
変更 1.01
Correction of product information
Minor content updates
Firmware 6.4.0
2025-11-25T00:00:00+00:00
変更 6.4.0
- New features
- Automatic chamber vent opening/closing (C1/+)
- Belt tuning wizard (C1/+)
- Faster and more responsive Prusa Connect experience
- Nozzle cleaning failed wizard
- Auto-retract (MK4 family, XL)
- Auto-retract improvements (C1/+)
- Auto-retract disable option (C1/+)
- Selective factory reset
- Chamber support for backwards G-Code compatibility (C1/+)
- Changes and improvements
- Improved print status messages
- Lazier homing, more cautious calibration
- Autoload improvements
- Unified XL & CORE One chamber filtration
- Option to continue after nozzle cleaning failure
- Print sheet detection (MK4 family)
- Respect maximum printed Z position
- Gearbox alignment calibration (XL)
- Filament change from Tune menu in any tool (XL)
- Support cancelling more objects
- Wi-Fi signal strength indicator
- BSOD knob press behavior
- Reworked filament sensor evaluation
- Ukrainian language support for all printers
- Fixes
- All the fixes from the 6.3.X releases have been expanded to other printers.
- Various fixes and stability improvements
Firmware 6.4.0
2025-11-25T00:00:00+00:00
変更 6.4.0
- New features
- Automatic chamber vent opening/closing (C1/+)
- Belt tuning wizard (C1/+)
- Faster and more responsive Prusa Connect experience
- Nozzle cleaning failed wizard
- Auto-retract (MK4 family, XL)
- Auto-retract improvements (C1/+)
- Auto-retract disable option (C1/+)
- Selective factory reset
- Chamber support for backwards G-Code compatibility (C1/+)
- Changes and improvements
- Improved print status messages
- Lazier homing, more cautious calibration
- Autoload improvements
- Unified XL & CORE One chamber filtration
- Option to continue after nozzle cleaning failure
- Print sheet detection (MK4 family)
- Respect maximum printed Z position
- Gearbox alignment calibration (XL)
- Filament change from Tune menu in any tool (XL)
- Support cancelling more objects
- Wi-Fi signal strength indicator
- BSOD knob press behavior
- Reworked filament sensor evaluation
- Ukrainian language support for all printers
- Fixes
- All the fixes from the 6.3.X releases have been expanded to other printers.
- Various fixes and stability improvements
Firmware 6.4.0
2025-11-25T00:00:00+00:00
変更 6.4.0
- New features
- Automatic chamber vent opening/closing (C1/+)
- Belt tuning wizard (C1/+)
- Faster and more responsive Prusa Connect experience
- Nozzle cleaning failed wizard
- Auto-retract (MK4 family, XL)
- Auto-retract improvements (C1/+)
- Auto-retract disable option (C1/+)
- Selective factory reset
- Chamber support for backwards G-Code compatibility (C1/+)
- Changes and improvements
- Improved print status messages
- Lazier homing, more cautious calibration
- Autoload improvements
- Unified XL & CORE One chamber filtration
- Option to continue after nozzle cleaning failure
- Print sheet detection (MK4 family)
- Respect maximum printed Z position
- Gearbox alignment calibration (XL)
- Filament change from Tune menu in any tool (XL)
- Support cancelling more objects
- Wi-Fi signal strength indicator
- BSOD knob press behavior
- Reworked filament sensor evaluation
- Ukrainian language support for all printers
- Fixes
- All the fixes from the 6.3.X releases have been expanded to other printers.
- Various fixes and stability improvements
Firmware 3.14.1
2024-11-28T00:00:00+00:00
変更 3.14.1
- Add filament presence check at start of print
- Region Mesh Bed Levelling fixes
- Show filament color/name during M600
- Fix safety timer not handled correctly
- Delay Z-Axis on Autoload
- Replace hard coded crash z lift value with Pause Z lift value.
- Send host actions on filament runout
- Lower MIN_Z_FOR_UNLOAD from 50mm to 20mm
- Add "load filament" if autoload is disabled
- Abort nozzle change if filament is loaded
- PowerPanic related changes
- Reduce ambient shutdown to 80 °C
- Added
utils/build.pyto be able to compile the firmware - MMU related changes
- Minor fixes
- Community related changes
Firmware 3.14.1 (3.0.3)
2024-11-28T00:00:00+00:00
変更 3.14.1 (3.0.3)
- Add filament presence check at start of print
- Region Mesh Bed Levelling fixes
- Show filament color/name during M600
- Fix safety timer not handled correctly
- Delay Z-Axis on Autoload
- Replace hard coded crash z lift value with Pause Z lift value.
- Send host actions on filament runout
- Lower MIN_Z_FOR_UNLOAD from 50mm to 20mm
- Add "load filament" if autoload is disabled
- Abort nozzle change if filament is loaded
- PowerPanic related changes
- Reduce ambient shutdown to 80 °C
- Added
utils/build.pyto be able to compile the firmware - MMU related changes
- Minor fixes
- Community related changes
Firmware 6.4.0
2025-11-25T00:00:00+00:00
変更 6.4.0
- New features
- Automatic chamber vent opening/closing (C1/+)
- Belt tuning wizard (C1/+)
- Faster and more responsive Prusa Connect experience
- Nozzle cleaning failed wizard
- Auto-retract (MK4 family, XL)
- Auto-retract improvements (C1/+)
- Auto-retract disable option (C1/+)
- Selective factory reset
- Chamber support for backwards G-Code compatibility (C1/+)
- Changes and improvements
- Improved print status messages
- Lazier homing, more cautious calibration
- Autoload improvements
- Unified XL & CORE One chamber filtration
- Option to continue after nozzle cleaning failure
- Print sheet detection (MK4 family)
- Respect maximum printed Z position
- Gearbox alignment calibration (XL)
- Filament change from Tune menu in any tool (XL)
- Support cancelling more objects
- Wi-Fi signal strength indicator
- BSOD knob press behavior
- Reworked filament sensor evaluation
- Ukrainian language support for all printers
- Fixes
- All the fixes from the 6.3.X releases have been expanded to other printers.
- Various fixes and stability improvements
Handbook 1.11
2023-11-10T00:00:00+00:00
変更 1.11
- Wi-Fi auto-reconnect fixed
- Improved Wi-Fi (ESP) flashing
- RTC fixed
- Additional hotend protection
- UI fixes
- New error code URL
- Improved bootstrap
- Known issues
Firmware 3.14.1
2024-11-28T00:00:00+00:00
変更 3.14.1
- Add filament presence check at start of print
- Region Mesh Bed Levelling fixes
- Show filament color/name during M600
- Fix safety timer not handled correctly
- Delay Z-Axis on Autoload
- Replace hard coded crash z lift value with Pause Z lift value.
- Send host actions on filament runout
- Lower MIN_Z_FOR_UNLOAD from 50mm to 20mm
- Add "load filament" if autoload is disabled
- Abort nozzle change if filament is loaded
- PowerPanic related changes
- Reduce ambient shutdown to 80 °C
- Added
utils/build.pyto be able to compile the firmware - MMU related changes
- Minor fixes
- Community related changes
Firmware 3.14.1
2024-11-28T00:00:00+00:00
変更 3.14.1
- Add filament presence check at start of print
- Region Mesh Bed Levelling fixes
- Show filament color/name during M600
- Fix safety timer not handled correctly
- Delay Z-Axis on Autoload
- Replace hard coded crash z lift value with Pause Z lift value.
- Send host actions on filament runout
- Lower MIN_Z_FOR_UNLOAD from 50mm to 20mm
- Add "load filament" if autoload is disabled
- Abort nozzle change if filament is loaded
- PowerPanic related changes
- Reduce ambient shutdown to 80 °C
- Added
utils/build.pyto be able to compile the firmware - MMU related changes
- Minor fixes
- Community related changes
Handbook 2.62
2020-06-12T00:00:00+00:00
変更 2.62
Reflects changes introduced in FW 3.9.0:
- First layer calibration chapter updated
- Linear Advance chapter updated
- Display brightness chapter added
- LCD menu structure updated
- MINTEMP information updated
Firmware 1.8.0
2025-03-11T00:00:00+00:00
変更 1.8.0
- Support for Prusa Connect
- Custom print profiles
- Updated PrusaLink Web
- Exposure time limits
- Reworked handling of USB flash drives
- API key support dropped
- Other improvements
- Bug fixes
- Known issues
Handbook 1.05
2020-06-12T00:00:00+00:00
変更 1.05
- Added information reflecting changes in firmware 1.4.0
- Added instructions on print display replacement and UV LED panel calibration
- Updated firmware update information
Firmware 3.3.0
2023-05-16T00:00:00+00:00
変更 3.3.0
- Extend all timers to 255 minutes
- IPA Filtering (new feature)
- Wash cycles (new feature)
- New heating algorithm
- Automatic fans control
- Factory reset option
- Improved self-test
- Bugfixes
Firmware 3.14.1
2024-11-28T00:00:00+00:00
変更 3.14.1
- Add filament presence check at start of print
- Region Mesh Bed Levelling fixes
- Show filament color/name during M600
- Fix safety timer not handled correctly
- Delay Z-Axis on Autoload
- Replace hard coded crash z lift value with Pause Z lift value.
- Send host actions on filament runout
- Lower MIN_Z_FOR_UNLOAD from 50mm to 20mm
- Add "load filament" if autoload is disabled
- Abort nozzle change if filament is loaded
- PowerPanic related changes
- Reduce ambient shutdown to 80 °C
- Added
utils/build.pyto be able to compile the firmware - MMU related changes
- Minor fixes
- Community related changes
Handbook 3.04
2018-09-12T00:00:00+00:00
変更 3.04
- Loading filament (updated chapter)
- LCD screen (updated chapter)
- Beeper settings (new chapter)
- Language settings (new chapter)
- MMU 2.0 (new chapter)
- Slic3r PE (updated chapter)
- Filament sensor (updated chapter)
- Updating firmware (updated chapter)
- Linearity correction (new chapter)
Firmware 3.14.1
2024-11-28T00:00:00+00:00
変更 3.14.1
- Add filament presence check at start of print
- Region Mesh Bed Levelling fixes
- Show filament color/name during M600
- Fix safety timer not handled correctly
- Delay Z-Axis on Autoload
- Replace hard coded crash z lift value with Pause Z lift value.
- Send host actions on filament runout
- Lower MIN_Z_FOR_UNLOAD from 50mm to 20mm
- Add "load filament" if autoload is disabled
- Abort nozzle change if filament is loaded
- PowerPanic related changes
- Reduce ambient shutdown to 80 °C
- Added
utils/build.pyto be able to compile the firmware - MMU related changes
- Minor fixes
- Community related changes
Firmware 3.2.3
2019-06-06T00:00:00+00:00
変更 3.2.3
- Preheat error improved
- Improved temperature regulation
- Remaining time estimation
- Adjustable beeper notifications
- Incomplete file check updated
- G-code fixes (M27, M110, M115)
Firmware 3.2.3
2019-06-06T00:00:00+00:00
変更 3.2.3
- Preheat error improved
- Improved temperature regulation
- Remaining time estimation
- Adjustable beeper notifications
- Incomplete file check updated
- G-code fixes (M27, M110, M115)
Firmware 3.0.12
2017-06-23T00:00:00+00:00
変更 3.0.12
- Improved XYZ calibration
- XYZ calibration results are now available in Support menu
- Selftest fixed
- Improved unload filament
- Multi Material
- When stopping a print, user is asked what filaments to unload
- “T?” Gcode added, which selects extruder to use prior to the print
- Added support for MK1
