ファームウェアとダウンロード

• New features
  • New Edition: C1+ (Gen 2) → INDX Conversion Support - Added support for converting the C1+ Gen 2 to INDX, including belt switching.
  • GT1.5 Belts - Added support for GT1.5 belts.
  • Expansion Joints Gen 2 - Added support for Expansion Joints Gen 2, featuring a significantly shorter heat-absorption phase on CORE One+ (Gen 2).
  • Automatic Nozzle Cleaner Calibration - Added automatic calibration of the nozzle cleaner.
  • Load All / Unload All - Added Load All and Unload All options to the Filament menu.
  • Filament Sensor Calibration - Added filament sensor calibration and improved handling of the “Not connected” state.
  • Crash Dump Saving - Added the option to save crash dumps after a Red Screen event via Settings > System > Save Crash Dump. Crash dumps can help diagnose and debug user-reported issues.
  • FLEX Material Current Profile - Added a dedicated current profile for FLEX materials (M906 P2).
• Improvements and Changes
  • Print State Bed Position - The bed now moves down after Empty Waste Bin, and when pausing, stopping, or finishing a print.
  • Tool Mapping Persistence - Tool mapping is now preserved when reprinting a job.
  • Chamber Grid - The chamber grid now closes automatically after a print is completed.
  • INDX Head LED Dimming - INDX head LEDs now dim together with the chamber light.
  • Menu Reorganization - Reorganized the menu structure for improved usability.
  • Nozzle Cleaner Resume - The nozzle is reheated in the nozzle cleaner when resuming a print.
  • Purge Point - Adjusted the purge point by +0.5 mm in Y.
  • INDX Nozzle Presence Detection - Relaxed the upper threshold for nozzle presence detection to improve detection reliability.
  • Ringdown Decay - Adjusted the "nozzle presence" decay treshold from 0.095 to 0.085.
• Fixes
  • Incorrect Temperature After Runout - Fixed an issue causing an incorrect nozzle temperature to be displayed after a filament runout.
  • Auto-Retract with Cold Nozzle - Fixed an issue where auto-retraction could be triggered with a cold nozzle.
  • Bed Position After Print State Changes - Fixed cases where the bed did not move to the expected position after pausing, stopping, or completing a print.

• New features
  • New editions: CORE One+ (Gen 2) and CORE One L+
  • Nozzle Wiper support, replacing the previous print-start nozzle cleaning routine
  • GT1.5 belts support
  • Immediate stop on filament runout
  • Guided calibration order - calibrations and tests declare their prerequisites
• Changes and improvements
  • Reorganized menus - some settings have been moved to different submenus
  • Filament compatibility checks in more places
  • Custom filament names may contain lowercase letters
• Fixes
  • Fixed not restoring original temperature on filament runout/mid-print change
  • More reliable communication with the xBuddy Extension
  • The last file in a folder was not visible, and related file list fixes
  • The printer no longer beeps on boot in Silent mode
  • An upward swipe on the touchscreen is no longer registered as a tap
  • And a lot more

• New features
  • New editions: CORE One+ (Gen 2) and CORE One L+
  • Nozzle Wiper support, replacing the previous print-start nozzle cleaning routine
  • GT1.5 belts support
  • Expansion Joints Gen 2 support, with a much shorter Absorbing heat phase [C1+ (Gen 2)]
  • Immediate stop on filament runout
  • Guided calibration order - calibrations and tests declare their prerequisites
• Changes and improvements
  • Reorganized menus - some settings have been moved to different submenus
  • Filament compatibility checks in more places
  • Custom filament names may contain lowercase letters
• Fixes
  • Fixed not restoring original temperature on filament runout/mid-print change
  • More reliable communication with the xBuddy Extension
  • The last file in a folder was not visible, and related file list fixes
  • The printer no longer beeps on boot in Silent mode
  • An upward swipe on the touchscreen is no longer registered as a tap
  • And a lot more

Summary

• Changes and improvements
  • Increased bed parking speed (5 mm/s → 15 mm/s)
• Fixes
  • Fixed display randomly freezing
  • Fixed print resume stuck at "Heating"
  • Fixed extruder motor not spinning after manual tool change
  • Improved Tool Offset Sensor stability [XL+]
  • Fixed parking position in tool offset calibration [XL]

• New features
  • New editions: CORE One+ (Gen 2) and CORE One L+
  • Nozzle Wiper support, replacing the previous print-start nozzle cleaning routine
  • GT1.5 belts support
  • Expansion Joints Gen 2 support, with a much shorter Absorbing heat phase [C1+ (Gen 2)]
  • Immediate stop on filament runout
  • Guided calibration order - calibrations and tests declare their prerequisites
• Changes and improvements
  • Reorganized menus - some settings have been moved to different submenus
  • Filament compatibility checks in more places
  • Custom filament names may contain lowercase letters
• Fixes
  • Fixed not restoring original temperature on filament runout/mid-print change
  • More reliable communication with the xBuddy Extension
  • The last file in a folder was not visible, and related file list fixes
  • The printer no longer beeps on boot in Silent mode
  • An upward swipe on the touchscreen is no longer registered as a tap
  • And a lot more

Summary

• New features and improvements
  • Improved filament change between different materials
• Fixes
  • Support for older xBuddy versions
  • Fixed input shaper calibration for CoreXY printers
  • Fixed not loading custom Connect certificates
  • Fixed a crash when printing more than 1024 objects

Added compatibility with Gen 2

Fixes

• Fixed not loading custom Connect certificates

New features:

• Firmware image vendor-signed to prevent a malicious 3rd-party firmware attack vector 

Fixed Bugs:

• Reduced USB filesystem privileges to eliminate a potential attack vector
• Reduced privileges of Klipper components to eliminate potential attack vectors
• Removed unused source code stubs to eliminate potential attack vectors
• Printer REST API sanitized against potential malicious code injection
• Service SSH access removed
• Printer name validation by RFC 1123 fixed

Documents:

• Security content of Prusa Pro HT90 firmware 1.3.56, Advisory ID: PSA-2026-001

• Support for Prusa Connect
• Custom print profiles
• Updated PrusaLink Web
• Exposure time limits
• Reworked handling of USB flash drives
• API key support dropped
• Other improvements
• Bug fixes
• Known issues

• Extend all timers to 255 minutes
• IPA Filtering (new feature)
• Wash cycles (new feature)
• New heating algorithm
• Automatic fans control
• Factory reset option
• Improved self-test
• Bugfixes

Summary

• Changes and improvements
  • Increased bed parking speed (5 mm/s → 15 mm/s)
• Fixes
  • Fixed display randomly freezing
  • Fixed print resume stuck at "Heating"
  • Fixed extruder motor not spinning after manual tool change
  • Improved Tool Offset Sensor stability [XL+]
  • Fixed parking position in tool offset calibration [XL]

• New features
  • New editions: CORE One+ (Gen 2) and CORE One L+
  • Nozzle Wiper support, replacing the previous print-start nozzle cleaning routine
  • GT1.5 belts support
  • Immediate stop on filament runout
  • Guided calibration order - calibrations and tests declare their prerequisites
• Changes and improvements
  • Reorganized menus - some settings have been moved to different submenus
  • Filament compatibility checks in more places
  • Custom filament names may contain lowercase letters
• Fixes
  • Fixed not restoring original temperature on filament runout/mid-print change
  • More reliable communication with the xBuddy Extension
  • The last file in a folder was not visible, and related file list fixes
  • The printer no longer beeps on boot in Silent mode
  • An upward swipe on the touchscreen is no longer registered as a tap
  • And a lot more

• New features
  • New editions: CORE One+ (Gen 2) and CORE One L+
  • Nozzle Wiper support, replacing the previous print-start nozzle cleaning routine
  • GT1.5 belts support
  • Expansion Joints Gen 2 support, with a much shorter Absorbing heat phase [C1+ (Gen 2)]
  • Immediate stop on filament runout
  • Guided calibration order - calibrations and tests declare their prerequisites
• Changes and improvements
  • Reorganized menus - some settings have been moved to different submenus
  • Filament compatibility checks in more places
  • Custom filament names may contain lowercase letters
• Fixes
  • Fixed not restoring original temperature on filament runout/mid-print change
  • More reliable communication with the xBuddy Extension
  • The last file in a folder was not visible, and related file list fixes
  • The printer no longer beeps on boot in Silent mode
  • An upward swipe on the touchscreen is no longer registered as a tap
  • And a lot more

Summary

• New features and improvements
  • Improved filament change between different materials
• Fixes
  • Support for older xBuddy versions
  • Fixed input shaper calibration for CoreXY printers
  • Fixed not loading custom Connect certificates
  • Fixed a crash when printing more than 1024 objects

Summary

• New features and improvements
  • Improved filament change between different materials
• Fixes
  • Support for older xBuddy versions
  • Fixed input shaper calibration for CoreXY printers
  • Fixed not loading custom Connect certificates
  • Fixed a crash when printing more than 1024 objects

Summary

• New features and improvements
  • Improved filament change between different materials
• Fixes
  • Support for older xBuddy versions
  • Fixed input shaper calibration for CoreXY printers
  • Fixed not loading custom Connect certificates
  • Fixed a crash when printing more than 1024 objects

Summary

• New features and improvements
  • Improved filament change between different materials
• Fixes
  • Support for older xBuddy versions
  • Fixed input shaper calibration for CoreXY printers
  • Fixed not loading custom Connect certificates
  • Fixed a crash when printing more than 1024 objects

Summary

• New features and improvements
  • Improved filament change between different materials
• Fixes
  • Support for older xBuddy versions
  • Fixed input shaper calibration for CoreXY printers
  • Fixed not loading custom Connect certificates
  • Fixed a crash when printing more than 1024 objects

• Add filament presence check at start of print
• Region Mesh Bed Levelling fixes
• Show filament color/name during M600
• Fix safety timer not handled correctly
• Delay Z-Axis on Autoload
• Replace hard coded crash z lift value with Pause Z lift value.
• Send host actions on filament runout
• Lower MIN_Z_FOR_UNLOAD from 50mm to 20mm
• Add "load filament" if autoload is disabled
• Abort nozzle change if filament is loaded
• PowerPanic related changes
• Reduce ambient shutdown to 80 °C
• Added utils/build.py to be able to compile the firmware
• MMU related changes
• Minor fixes
• Community related changes

• Add filament presence check at start of print
• Region Mesh Bed Levelling fixes
• Show filament color/name during M600
• Fix safety timer not handled correctly
• Delay Z-Axis on Autoload
• Replace hard coded crash z lift value with Pause Z lift value.
• Send host actions on filament runout
• Lower MIN_Z_FOR_UNLOAD from 50mm to 20mm
• Add "load filament" if autoload is disabled
• Abort nozzle change if filament is loaded
• PowerPanic related changes
• Reduce ambient shutdown to 80 °C
• Added utils/build.py to be able to compile the firmware
• MMU related changes
• Minor fixes
• Community related changes

Fixes

• Fixed not loading custom Connect certificates

• Add filament presence check at start of print
• Region Mesh Bed Levelling fixes
• Show filament color/name during M600
• Fix safety timer not handled correctly
• Delay Z-Axis on Autoload
• Replace hard coded crash z lift value with Pause Z lift value.
• Send host actions on filament runout
• Lower MIN_Z_FOR_UNLOAD from 50mm to 20mm
• Add "load filament" if autoload is disabled
• Abort nozzle change if filament is loaded
• PowerPanic related changes
• Reduce ambient shutdown to 80 °C
• Added utils/build.py to be able to compile the firmware
• MMU related changes
• Minor fixes
• Community related changes

• Support for Prusa Connect
• Custom print profiles
• Updated PrusaLink Web
• Exposure time limits
• Reworked handling of USB flash drives
• API key support dropped
• Other improvements
• Bug fixes
• Known issues

• Add filament presence check at start of print
• Region Mesh Bed Levelling fixes
• Show filament color/name during M600
• Fix safety timer not handled correctly
• Delay Z-Axis on Autoload
• Replace hard coded crash z lift value with Pause Z lift value.
• Send host actions on filament runout
• Lower MIN_Z_FOR_UNLOAD from 50mm to 20mm
• Add "load filament" if autoload is disabled
• Abort nozzle change if filament is loaded
• PowerPanic related changes
• Reduce ambient shutdown to 80 °C
• Added utils/build.py to be able to compile the firmware
• MMU related changes
• Minor fixes
• Community related changes

• Extend all timers to 255 minutes
• IPA Filtering (new feature)
• Wash cycles (new feature)
• New heating algorithm
• Automatic fans control
• Factory reset option
• Improved self-test
• Bugfixes

• Add filament presence check at start of print
• Region Mesh Bed Levelling fixes
• Show filament color/name during M600
• Fix safety timer not handled correctly
• Delay Z-Axis on Autoload
• Replace hard coded crash z lift value with Pause Z lift value.
• Send host actions on filament runout
• Lower MIN_Z_FOR_UNLOAD from 50mm to 20mm
• Add "load filament" if autoload is disabled
• Abort nozzle change if filament is loaded
• PowerPanic related changes
• Reduce ambient shutdown to 80 °C
• Added utils/build.py to be able to compile the firmware
• MMU related changes
• Minor fixes
• Community related changes

• Add filament presence check at start of print
• Region Mesh Bed Levelling fixes
• Show filament color/name during M600
• Fix safety timer not handled correctly
• Delay Z-Axis on Autoload
• Replace hard coded crash z lift value with Pause Z lift value.
• Send host actions on filament runout
• Lower MIN_Z_FOR_UNLOAD from 50mm to 20mm
• Add "load filament" if autoload is disabled
• Abort nozzle change if filament is loaded
• PowerPanic related changes
• Reduce ambient shutdown to 80 °C
• Added utils/build.py to be able to compile the firmware
• MMU related changes
• Minor fixes
• Community related changes

• Preheat error improved
• Improved temperature regulation
• Remaining time estimation
• Adjustable beeper notifications
• Incomplete file check updated
• G-code fixes (M27, M110, M115)

• Preheat error improved
• Improved temperature regulation
• Remaining time estimation
• Adjustable beeper notifications
• Incomplete file check updated
• G-code fixes (M27, M110, M115)

• Improved XYZ calibration
• XYZ calibration results are now available in Support menu
• Selftest fixed
• Improved unload filament
• Multi Material
• When stopping a print, user is asked what filaments to unload
• “T?” Gcode added, which selects extruder to use prior to the print
• Added support for MK1