The printer is displaying the message: The print parameters are out of range of the printer, the system can try to fix the project. Proceed?
Error name: Parameters out of range
In case a printing parameter like the layer thickness or exposure time has been manually modified, either in a slicer or directly on the printer, the value for the parameter might be out of range. The printer will show this warning to either continue or cancel the print. In case you continue, the printer will automatically change the values to the closest valid ones. If you decide to cancel the print, re-slice the part in the PrusaSlicer, and make sure that you have the latest firmware.
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.