EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

Original Prusa MINI

Articles

Firmware updating (MINI/MINI+)

Firmware updating (MINI/MINI+)

Using the printer > Printer maintenance
SD cards and USB drives

SD cards and USB drives

About your printer > General Information
Changing/replacing the nozzle (MINI)

Changing/replacing the nozzle (MINI)

Using the printer > Printer maintenance
Regular maintenance (MINI)

Regular maintenance (MINI)

Using the printer > Printer maintenance
Cold pull (MINI)

Cold pull (MINI)

Using the printer > Printer maintenance
Adjusting belt tension (MINI/MINI+)

Adjusting belt tension (MINI/MINI+)

Using the printer > Printer maintenance
Buddy electronics Wiring (MINI)

Buddy electronics Wiring (MINI)

Using the printer > Printer maintenance
Vibration/noise when printing (MINI/MINI+)

Vibration/noise when printing (MINI/MINI+)

Using the printer > Printer maintenance
How to remove a stripped screw

How to remove a stripped screw

Using the printer > Printer maintenance
How to replace a M.I.N.D.A. sensor (MINI)

How to replace a M.I.N.D.A. sensor (MINI)

Using the printer > Printer maintenance
How to replace a hotend PTFE tube (MINI/MINI+)

How to replace a hotend PTFE tube (MINI/MINI+)

Using the printer > Printer maintenance
How to access and clean the extruder-pulley (MINI/MINI+)

How to access and clean the extruder-pulley (MINI/MINI+)

Using the printer > Printer maintenance
How to update firmware (MINI/MINI+)

How to update firmware (MINI/MINI+)

Using the printer > Printer maintenance
How to trim PTFE tube - Original Prusa printers

How to trim PTFE tube - Original Prusa printers

Using the printer > Printer maintenance
How to replace a heaterblock/heatbreak (MINI/MINI+)

How to replace a heaterblock/heatbreak (MINI/MINI+)

Using the printer > Printer maintenance
Replacing the PEI sheet on the (MK3S/MK3/MK2.5S/MK2.5)

Replacing the PEI sheet on the (MK3S/MK3/MK2.5S/MK2.5)

Using the printer > Printer maintenance
How to replace a heatbed thermistor (MINI/MINI+)

How to replace a heatbed thermistor (MINI/MINI+)

Using the printer > Printer maintenance
How to replace a hotend thermistor (MINI/MINI+)

How to replace a hotend thermistor (MINI/MINI+)

Using the printer > Printer maintenance
How to post-process the printed parts

How to post-process the printed parts

Using the printer > 3D models
How to replace a heatsink (MINI/MINI+)

How to replace a heatsink (MINI/MINI+)

Using the printer > Printer maintenance
Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us