<p><strong>MK4 to MK4S upgrade <br /></strong></p>
<p>The current lead time is <strong>2-3 weeks </strong>for both xLCD versions.</p>
<table class="table" style="border-collapse: collapse; height: 330.828px; border-style: ridge; width: 100%;" border="1">
<tbody>
<tr style="height: 28.375px;">
<td style="width: 29.0798%; height: 28.375px; border-style: dotted; border-width: 1px; text-align: left;">Order week</td>
<td style="width: 29.2017%; height: 28.375px; border-style: dotted; border-width: 1px; text-align: left;">Order date</td>
<td style="width: 41.7185%; height: 28.375px; border-style: dotted; border-width: 1px; text-align: left;">Shipping estimate</td>
</tr>
<tr style="height: 33.25px;">
<td style="width: 29.0798%; border-style: dotted; border-width: 1px; text-align: left; height: 33.25px;">Week 33</td>
<td style="width: 29.2017%; border-style: dotted; border-width: 1px; text-align: left; height: 33.25px;">starts August 12, 2024</td>
<td style="width: 41.7185%; height: 33.25px; border-style: dotted; border-width: 1px; text-align: left;" rowspan="2">Already shipped</td>
</tr>
<tr style="height: 24.7344px;">
<td style="width: 29.0798%; border-style: dotted; border-width: 1px; text-align: left; height: 24.7344px;">Week 34</td>
<td style="width: 29.2017%; border-style: dotted; border-width: 1px; text-align: left; height: 24.7344px;">starts August 19, 2024</td>
</tr>
<tr style="height: 24.7344px;">
<td style="width: 29.0798%; border-style: dotted; border-width: 1px; text-align: left; height: 24.7344px;">Week 35</td>
<td style="width: 29.2017%; border-style: dotted; border-width: 1px; text-align: left; height: 24.7344px;">starts August 26, 2024</td>
<td style="width: 41.7185%; height: 101.203px; border-style: dotted; border-width: 1px; text-align: left;" rowspan="6">Currently shipping</td>
</tr>
<tr style="height: 24.7344px;">
<td style="width: 29.0798%; border-style: dotted; border-width: 1px; text-align: left; height: 24.7344px;">Week 36</td>
<td style="width: 29.2017%; border-style: dotted; border-width: 1px; text-align: left; height: 24.7344px;">starts September 2, 2024</td>
</tr>
<tr style="height: 27px;">
<td style="width: 29.0798%; border-style: dotted; border-width: 1px; text-align: left; height: 27px;">Week 37</td>
<td style="width: 29.2017%; border-style: dotted; border-width: 1px; text-align: left; height: 27px;">starts September 9, 2024</td>
</tr>
<tr style="height: 30px;">
<td style="width: 29.0798%; border-style: dotted; border-width: 1px; text-align: left; height: 30px;">Week 38</td>
<td style="width: 29.2017%; border-style: dotted; border-width: 1px; text-align: left; height: 30px;">starts September 16, 2024</td>
</tr>
<tr style="height: 27px;">
<td style="width: 29.0798%; border-style: dotted; border-width: 1px; text-align: left; height: 27px;">Week 39</td>
<td style="width: 29.2017%; border-style: dotted; border-width: 1px; text-align: left; height: 27px;">starts September 23, 2024</td>
</tr>
<tr style="height: 27px;">
<td style="width: 29.0798%; border-style: dotted; border-width: 1px; text-align: left; height: 27px;">Week 40</td>
<td style="width: 29.2017%; border-style: dotted; border-width: 1px; text-align: left; height: 27px;">starts September 30, 2024</td>
</tr>
<tr style="height: 21px;">
<td style="width: 29.0798%; border-style: dotted; border-width: 1px; text-align: left; height: 21px;">Week 41</td>
<td style="width: 29.2017%; border-style: dotted; border-width: 1px; text-align: left; height: 21px;">starts October 7, 2024</td>
<td style="width: 41.7185%; border-style: dotted; border-width: 1px; text-align: left; height: 84px;" rowspan="3">From week 47 (starts November 18, 2024)</td>
</tr>
<tr style="height: 21px;">
<td style="width: 29.0798%; border-style: dotted; border-width: 1px; text-align: left; height: 21px;">Week 42</td>
<td style="width: 29.2017%; border-style: dotted; border-width: 1px; text-align: left; height: 21px;">starts October 14, 2024</td>
</tr>
<tr style="height: 21px;">
<td style="width: 29.0798%; border-style: dotted; border-width: 1px; text-align: left; height: 21px;">Week 43</td>
<td style="width: 29.2017%; border-style: dotted; border-width: 1px; text-align: left; height: 21px;">starts October 21, 2024</td>
</tr>
<tr style="height: 21px;">
<td style="width: 29.0798%; border-style: dotted; border-width: 1px; text-align: left; height: 21px;">Week 44</td>
<td style="width: 29.2017%; border-style: dotted; border-width: 1px; text-align: left; height: 21px;">starts October 28, 2024</td>
<td style="width: 41.7185%; border-style: dotted; border-width: 1px; text-align: left;" rowspan="3">From week 48 (starts November 25, 2024)</td>
</tr>
<tr>
<td style="width: 29.0798%; border-style: dotted; border-width: 1px; text-align: left;">Week 45</td>
<td style="width: 29.2017%; border-style: dotted; border-width: 1px; text-align: left;">starts November 4, 2024</td>
</tr>
<tr>
<td style="width: 29.0798%; border-style: dotted; border-width: 1px; text-align: left;">Week 46</td>
<td style="width: 29.2017%; border-style: dotted; border-width: 1px; text-align: left;">starts November 11, 2024</td>
</tr>
</tbody>
</table>
<p></p>
<p> </p>
<h3><span style="font-size: 20px;">Current lead time estimates for new orders</span></h3>
<p><span style="color: #e67e23;"><strong>Updated: November 11th, 2024 </strong></span></p>
<p><em>The dates are only an estimation at the date of update, specified above, and rely on the actual</em> production. <em>We're doing our best but please be aware that it can shift for the lead time products. We will update here and on the product pages accordingly.</em></p>
<p>The lead time estimate applies to standalone products, other products in the order may increase the lead time.</p>
<p>If you've ordered a product in a bundle, the lead time of the order is set based on the product in the bundle with the longest lead time.</p>
<p> </p>
<p></p>
<table class="table" style="border-collapse: collapse; height: 765.922px; border-style: ridge; width: 100%;" border="1">
<tbody>
<tr style="height: 27.922px;">
<td style="height: 27.922px; width: 48.3436%; border-style: dotted; border-width: 1px; text-align: center;">
<h4>Product</h4>
</td>
<td style="height: 27.922px; width: 51.6564%; border-style: dotted; border-width: 1px; text-align: center;">
<h4>Lead time</h4>
</td>
</tr>
<tr style="height: 72px;">
<td style="width: 48.3436%; border-style: dotted; border-width: 1px; text-align: center; height: 72px;">
<p><strong>Original Prusa XL Enclosure<br /></strong><em>(standalone)</em><strong><br /></strong></p>
</td>
<td style="width: 51.6564%; border-style: dotted; border-width: 1px; text-align: center; height: 72px;">
<p><strong>In stock</strong></p>
</td>
</tr>
<tr style="height: 72px;">
<td style="width: 48.3436%; border-style: dotted; border-width: 1px; text-align: center; height: 72px;">
<p><strong>Advanced Filtration System <br /></strong>(for Original Prusa Enclosure)</p>
</td>
<td style="width: 51.6564%; border-style: dotted; border-width: 1px; text-align: center; height: 72px;">
<p><strong>In stock</strong></p>
</td>
</tr>
<tr style="height: 72px;">
<td style="width: 48.3436%; border-style: dotted; border-width: 1px; text-align: center; height: 72px;">
<p><strong>MK4 to MK4S upgrade<br /></strong>/MK4S upgrade for versions with old xLCD</p>
</td>
<td style="width: 51.6564%; border-style: dotted; border-width: 1px; text-align: center; height: 72px;">
<p><strong>2-3 weeks</strong></p>
</td>
</tr>
<tr style="height: 72px;">
<td style="width: 48.3436%; border-style: dotted; border-width: 1px; text-align: center; height: 72px;">
<p><strong>MK3.9 to MK3.9S upgrade</strong></p>
</td>
<td style="width: 51.6564%; border-style: dotted; border-width: 1px; text-align: center; height: 72px;">
<p><strong>In stock</strong></p>
</td>
</tr>
<tr style="height: 51px;">
<td style="width: 48.3436%; border-style: dotted; border-width: 1px; text-align: center; height: 51px;">
<p><strong>MK3S/+ to MK4S upgrade</strong></p>
</td>
<td style="width: 51.6564%; border-style: dotted; border-width: 1px; text-align: center; height: 51px;">
<p><strong>2-3 weeks</strong></p>
</td>
</tr>
<tr>
<td style="width: 48.3436%; border-style: dotted; border-width: 1px; text-align: center;">
<p><strong>MK3S/+ to MK3.9S upgrade</strong></p>
</td>
<td style="width: 51.6564%; border-style: dotted; border-width: 1px; text-align: center;">
<p><strong>In stock</strong></p>
</td>
</tr>
<tr style="height: 51px;">
<td style="width: 48.3436%; border-style: dotted; border-width: 1px; text-align: center; height: 51px;">
<p><strong>MK3S/+ to MK3.5S upgrade</strong></p>
</td>
<td style="width: 51.6564%; border-style: dotted; border-width: 1px; text-align: center; height: 51px;">
<p><strong>In stock</strong></p>
</td>
</tr>
<tr style="height: 72px;">
<td style="width: 48.3436%; border-style: dotted; border-width: 1px; text-align: center; height: 72px;">
<p><strong>Original Prusa MMU3 upgrade kit (for MK4S/MK3.9S)</strong></p>
</td>
<td style="width: 51.6564%; border-style: dotted; border-width: 1px; text-align: center; height: 72px;">
<p><strong>1-2 weeks</strong></p>
</td>
</tr>
<tr style="height: 51px;">
<td style="width: 48.3436%; border-style: dotted; border-width: 1px; text-align: center; height: 51px;">
<p><strong>MMU3 assembled unit (for MK4S/MK3.9S) </strong></p>
</td>
<td style="width: 51.6564%; border-style: dotted; border-width: 1px; text-align: center; height: 51px;">
<p><strong>1-2 weeks</strong></p>
</td>
</tr>
<tr style="height: 51px;">
<td style="width: 48.3436%; border-style: dotted; border-width: 1px; text-align: center; height: 51px;">
<p><strong>MMU3 assembled unit (for MK4/MK3.9)</strong></p>
</td>
<td style="width: 51.6564%; border-style: dotted; border-width: 1px; text-align: center; height: 51px;">
<p><strong>In stock</strong></p>
</td>
</tr>
<tr style="height: 51px;">
<td style="width: 48.3436%; border-style: dotted; border-width: 1px; text-align: center; height: 51px;">
<p><strong>MMU3 assembled unit (for MK3.5S/MK3.5) </strong></p>
</td>
<td style="width: 51.6564%; border-style: dotted; border-width: 1px; text-align: center; height: 51px;">
<p><strong>In stock</strong></p>
</td>
</tr>
<tr style="height: 51px;">
<td style="width: 48.3436%; border-style: dotted; border-width: 1px; text-align: center; height: 51px;">
<p><strong>MMU3 assembled unit (for MK3S+) </strong></p>
</td>
<td style="width: 51.6564%; border-style: dotted; border-width: 1px; text-align: center; height: 51px;">
<p><strong>In stock</strong></p>
</td>
</tr>
<tr style="height: 72px;">
<td style="width: 48.3436%; border-style: dotted; border-width: 1px; text-align: center; height: 72px;">
<p><strong>Original Prusa MMU2S to MMU3 upgrade<br />for MK4S/MK3.9S</strong></p>
</td>
<td style="width: 51.6564%; border-style: dotted; border-width: 1px; text-align: center; height: 72px;">
<p><strong>1-2 weeks</strong></p>
</td>
</tr>
</tbody>
</table>
<p>You can find your order shipping date in the order detail section in our shop.</p>
<div class="note-callout">All products purchased in our <a href="https://shop.prusa3d.com/">online store</a> are currently being shipped from the<strong> Czech Republic, </strong>a member state of the <strong>European Union, customs charges may apply for shipments to countries outside of the EU!</strong> Please see our advisory article <a href="http://help.prusa3d.com/article/vat-value-added-tax-customs-fees_1505#orders-outside-eu">here</a>.</div>

Shipping information

Infill patterns

<div><strong><img decoding="async" loading="lazy" style="float: right;" src="https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg-400x400.jpg 400w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg-600x600.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg-300x300.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg-768x768.jpg 768w" alt="" width="225" height="225"></strong></div>
<h3>Basic info</h3>
<div><strong>PETG</strong> is one of the most easily printable materials, it is <strong>inexpensive and suitable for beginners</strong>. Relatively high tenacity and temperature resistance make it <strong>suitable for printing technical parts</strong> (for example parts of our printers).</div>
<div>&nbsp;</div>
<div><strong>Recommended nozzle temperature:</strong> 230 °C for the first layer, 240 °C for the other layers</div>
<div>&nbsp;</div>
<div><strong>Recommended bed temperature:</strong> 85 °C for the first layer, 90 °C for the other layers</div>
<div>&nbsp;</div>
<div><strong>Heatbed:</strong> Using powder-coated TXT or satin sheet is highly recommended. Printing on smooth PEI surface might damage the sheet.</div>
<h3>Description</h3>
<div>
<p><a href="https://www.prusa3d.com/category/prusament-petg/"><strong data-stringify-type="bold">PETG</strong></a> (Polyethylene Terephthalate modified with Glycol) is a commonly used technical material, popular among 3D printer users for its <strong>low price and good printability</strong>. It’s tenacious, with good temperature resistance; PETG is most commonly used for printing various mechanical parts, holders, clamps, and waterproof parts (thanks to great layer adhesion).</p>
<p>PETG has a glossy surface, adheres greatly to a print sheet, and <strong>does not shrink or warp</strong> (it has very little thermal expansion), therefore it’s suitable for printing large models. Plus, its high tenacity and flexibility often <strong>prevent it from breaking.</strong> Due to good temperature resistance, PETG parts are suitable both for interior and most exterior use (with temperatures below 80 °C). <strong>Parts of our printers are made of PETG!</strong></p>
<p>The letter G in PETG means that it’s modified with glycol during the manufacturing process. Glycol makes PET less brittle, easier to print, and more transparent for translucent prints. Of course, you can print also with PET filaments without glycol. However, printing with only PET is challenging and does not offer any advantage whatsoever.</p>
<div class="warning-callout">Even though PETG in itself may be considered <a href="http://help.prusa3d.com/article/food-safe-fdm-printing_112313">food-safe</a>, it consists of layers, as every 3D print, in which bacteria can grow over time. You can prevent this by applying a <strong>food-safe(epoxy) coating.</strong> Also, a stainless-steel nozzle should be used for if food is the intended application.</div>
<p>Although <strong>PETG</strong> is frequently used in <strong>food industry</strong> and is considered <strong>food-safe</strong>, we do not recommend it (or any other filament) for printing dishes or other stuff that comes into direct contact with food. The main reason is tiny print layer surface grooves that can support numerous bacterial colonies. But if you still want 3D printed dishes, we suggest <strong>applying a special layer</strong> that seals the surface (food-safe coating) and printing with a clean steel nozzle.</p>
<p>Some of the manufacturers <strong>enrich PETG with various additives</strong> and sell these materials under different names. For example, Spoolworks EDGE by E3D is modified PET/Copolyester Blend with additives. The goal is to acquire better visual qualities, surface and layer adhesion, etc.</p>
<p>To compare supported material properties, see our <a href="https://help.prusa3d.com/en/materials">material table.</a></p>
</div>
<table class="striped">
<tbody>
<tr>
<th>
<p>Pros</p>
</th>
<th>
<p>Cons</p>
</th>
</tr>
<tr>
<td>
<p>✔ Easy to print</p>
</td>
<td>
<p>✖ Possibility of stringing</p>
</td>
</tr>
<tr>
<td>
<p>✔ Good layer adhesion</p>
</td>
<td>
<p>✖ Poor bridging and overhangs</p>
</td>
</tr>
<tr>
<td>
<p>✔ Tough and durable</p>
</td>
<td>
<p>✖ Not great for printing detailed parts</p>
</td>
</tr>
<tr>
<td>
<p>✔ Low warping</p>
</td>
<td>
<p>✖ Bonds strongly to the print surface</p>
</td>
</tr>
<tr>
<td>✔ High temperature-resistance</td>
<td>
<p>✖ Soluble in dangerous chemicals</p>
</td>
</tr>
<tr>
<td>✔ Water and humidity resistant</td>
<td>
<p>✖ Supports are hard to remove</p>
</td>
</tr>
</tbody>
</table>
<h3>Best use</h3>
<p>PETG is used universally but is especially suitable for mechanical parts for both indoor and outdoor use. We use PETG to print parts for our printers! Plastic bottles are also made from this kind of material.</p>
<h3>Tips for successful printing</h3>
<p><strong>Temperature settings and cooling</strong></p>
<p>Unlike PLA, <strong>PETG requires a heated bed (85 °C).</strong> Its bridging- and overhang-behavior is usually worse, plus it is prone to stringing. Stringing can be moderated with higher retractions and lower nozzle temperature, but we suggest <strong>using the PrusaSlicer profiles that should work fine.</strong> It’s important to <strong>cool the PETG print</strong> - this helps to keep the model detailed and prevents stringing and oozing. But if you want the model to be as tough as possible, try to turn off the print fan. Higher filament temperature improves merging between layers which leads to better mechanical resistance. Otherwise, we recommend printing the first few layers with the print fan off to prevent deformation, then with the fan running at half its power.</p>
<div class="warning-callout"><strong>Do not print on the smooth PEI sheet</strong> as the adhesion may be too strong!</div>
<p><strong>Print surface preparation</strong></p>
<p>Make sure the print surface is clean, as described in <a href="http://help.prusa3d.com/article/first-layer-issues_1804">our dedicated article</a>. It is advisable to use one of the <strong>powder-coated print sheets. Do not print on the smooth PEI sheet</strong> as the adhesion may be too strong! If you decide to use the smooth PEI sheet anyway, apply a glue stick on it before printing.</p>
<p><strong>Adding more perimeters for more solid parts</strong></p>
<p>If you want to print truly solid parts, <strong>try to increase the number of perimeters</strong> instead of adding more infill.</p>
<h3>Postprocessing</h3>
<p>PETG can be easily sanded both dry and wet.</p>
<p><strong>Dissolving PETG</strong></p>
<p><strong>Dissolving and smoothing PETG</strong> is possible only in a laboratory by skilled lab workers using <strong>dangerous chemicals</strong> (Dichloromethane).</p>
<h3>Sample prints</h3>
<table style="border-collapse: collapse; width: 100%; height: 954px;" border="0">
<tbody>
<tr style="height: 300px;">
<td style="width: 48.805%; height: 300px;"><img decoding="async" loading="lazy" src="https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg-1-1.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg-1-1-400x400.jpg 400w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg-1-1-600x600.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg-1-1-300x300.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg-1-1-768x768.jpg 768w" alt="" width="800" height="800"></td>
<td style="width: 48.805%; height: 300px;"><img decoding="async" loading="lazy" src="https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-jet-black-1kg.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-jet-black-1kg-400x400.jpg 400w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-jet-black-1kg-600x600.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-jet-black-1kg-300x300.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-jet-black-1kg-768x768.jpg 768w" alt="" width="800" height="800"></td>
</tr>
<tr style="height: 18px;">
<td style="width: 48.805%; height: 18px; text-align: center;"><em>MMU (Multi-Material Unit)</em></td>
<td style="width: 48.805%; height: 18px; text-align: center;"><em>Electronics cover and other printer parts</em></td>
</tr>
<tr style="height: 300px;">
<td style="width: 48.805%; height: 300px;"><img decoding="async" loading="lazy" src="https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg-2.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg-2-400x400.jpg 400w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg-2-600x600.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg-2-300x300.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg-2-768x768.jpg 768w" alt="" width="800" height="800"></td>
<td style="width: 48.805%; height: 300px;"><img decoding="async" loading="lazy" src="https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg-3.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg-3-400x400.jpg 400w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg-3-600x600.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg-3-300x300.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-prusa-orange-1kg-3-768x768.jpg 768w" alt="" width="800" height="800"></td>
</tr>
<tr style="height: 18px;">
<td style="width: 48.805%; height: 18px; text-align: center;"><em>Ukulele</em></td>
<td style="width: 48.805%; height: 18px; text-align: center;"><em>Various mechanical parts</em></td>
</tr>
<tr style="height: 300px;">
<td style="width: 48.805%; height: 300px; text-align: center;"><img decoding="async" loading="lazy" src="https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-urban-grey-1kg-1.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-urban-grey-1kg-1-400x400.jpg 400w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-urban-grey-1kg-1-600x600.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-urban-grey-1kg-1-300x300.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-urban-grey-1kg-1-768x768.jpg 768w" alt="" width="800" height="800"></td>
<td style="width: 48.805%; height: 300px; text-align: center;"><img decoding="async" loading="lazy" src="https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-urban-grey-1kg.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-urban-grey-1kg-400x400.jpg 400w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-urban-grey-1kg-600x600.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-urban-grey-1kg-300x300.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/prusament-petg-urban-grey-1kg-768x768.jpg 768w" alt="" width="800" height="800"></td>
</tr>
<tr style="height: 18px;">
<td style="width: 48.805%; height: 18px; text-align: center;"><em>Electronic parts</em></td>
<td style="width: 48.805%; height: 18px; text-align: center;"><em>Boxes and organizers</em></td>
</tr>
</tbody>
</table>


PETG

Different nozzle types

<p>Prusa Connect and PrusaLink are two remote printing solutions developed in-house by Prusa. Its origin is in the management system used in our <a href="https://blog.prusaprinters.org/guinness-world-records-1096-original-prusa-3d-printers-running-at-the-same-time_30677/">record-sized print farm located in Prague HQ.</a></p>
<ul>
<ul>
<li><strong>Prusa Connect</strong> is a cloud service for remote printing available from anywhere.</li>
<li><strong>PrusaLink</strong>* is the client-side running locally on your printer, accessible from local network</li>
</ul>
</ul>
<p><em>*formerly known as Prusa Connect Local</em></p>
<p> </p>
<h2>What is Prusa Connect?</h2>
<p>Prusa Connect (<a href="http://connect.prusa3d.com">connect.prusa3d.com</a>) allows you to control your individual printers or even manage a print farm from anywhere in the world.</p>
<p style="text-align: center;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2023/08/9f18d1552ef82ea7ef4960a43a86a17b.png" sizes="(min-width: 1024px) 820px, 100vw" srcset="Prusa Connect and PrusaLink explained" alt="" width="900" height="607" loading="lazy" /></p>
<p style="text-align: center;"><em>Example of Prusa Connect interface (cloud service)</em></p>
<p> </p>
<p>It is available for free to the owners of selected Original Prusa printers (see the list below). You get a free 1 GB of cloud storage for your G-codes and telemetric data. The full list of features and pricing for end customers or businesses will be announced later on.</p>
<p>Furthermore, Prusa Connect is able to monitor the use of each printer individually, providing valuable statistics of your production environment. </p>
<p> </p>
<h2>What is PrusaLink?</h2>
<p>Much like <a href="http://help.prusa3d.com/article/about-octoprint_1790">Octoprint</a>, this remote printer-management system runs locally on your Original Prusa printer.</p>
<p><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2023/01/12af6bd49830e088.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PrusaLink and Prusa Connect explained" alt="" width="1451" height="800" loading="lazy" /></p>
<p style="text-align: center;"><em>Example of PrusaLink interface (local network)</em></p>
<p> </p>
<p>Its main goal is to provide communication between your printer and the Prusa Connect cloud. The secondary function is to provide a web interface, which can be used on your local (home) network only. Simply paste the printer's IP address into your web browser to access it. Using PrusaLink alone you can monitor your printer, upload G-codes, start or cancel a print. </p>
<p> </p>
<h2>How to install and configure PrusaLink and Prusa Connect?</h2>
<p>To use the Prusa Connect, you have to first set up the PrusaLink on your printer. The guides below will take you to step by step through the entire process.</p>
<table class="striped" style="width: 100%; height: 135.328125px;">
<tbody>
<tr style="height: 21.109375px;">
<td style="width: 34.722272%; height: 21.109375px;"><strong>FDM printers</strong></td>
<td style="width: 32.026194%; height: 21.109375px;"><strong>PrusaLink</strong></td>
<td style="width: 33.374233%; height: 21.109375px;"><strong>Prusa Connect</strong></td>
</tr>
<tr style="height: 18px;">
<td style="width: 34.722272%; height: 18px;">Original Prusa<strong> MK4/S, MK3.9/S, MK3.5/S</strong></td>
<td style="width: 32.026194%; height: 18px;"><a href="http://help.prusa3d.com/guide/wi-fi-and-prusalink-setup-mk4-mk3-9-mk3-5-xl-mini_413293">built-in</a></td>
<td style="width: 33.374233%; height: 18px;"><a href="http://help.prusa3d.com/guide/adding-the-printer-to-prusa-connect-mk4-s-mk3-9-s-mk3-5-s-xl-mini_417586">Available</a></td>
</tr>
<tr style="height: 36px;">
<td style="width: 34.722272%; height: 36px;">Original Prusa i3 <strong>MK3/S/+</strong></td>
<td style="width: 32.026194%; height: 36px;"><a href="http://help.prusa3d.com/guide/prusalink-and-prusa-connect-setup-mk3-s-_221744">via RPi / RPi Zero (GPIO</a>/<a href="http://help.prusa3d.com/guide/prusalink-prusa-connect-with-rpi-3-4-usb-mk2-5-s-mk3-s-_469341">USB)</a></td>
<td style="width: 33.374233%; height: 36px;"><a href="http://help.prusa3d.com/guide/prusalink-and-prusa-connect-setup-mk3-s-_221744">Available</a></td>
</tr>
<tr style="height: 18px;">
<td style="width: 34.722272%; height: 18px;">Original Prusa i3 <strong>MK2.5/S</strong></td>
<td style="width: 32.026194%; height: 18px;"><a href="http://help.prusa3d.com/guide/prusalink-prusa-connect-with-rpi-3-4-usb-mk2-5-s-mk3-s-_469341">via RPi (USB)</a></td>
<td style="width: 33.374233%; height: 18px;"><a href="http://help.prusa3d.com/guide/prusalink-prusa-connect-with-rpi-3-4-usb-mk2-5-s-mk3-s-_469341">Available</a></td>
</tr>
<tr style="height: 21.109375px;">
<td style="width: 34.722272%; height: 21.109375px;">Original Prusa <strong>XL</strong></td>
<td style="width: 32.026194%; height: 21.109375px;"><a href="http://help.prusa3d.com/guide/wi-fi-and-prusalink-setup-mk4-mk3-9-mk3-5-xl-mini_413293">built-in</a></td>
<td style="width: 33.374233%; height: 21.109375px;"><a href="http://help.prusa3d.com/guide/adding-the-printer-to-prusa-connect-mk4-s-mk3-9-s-mk3-5-s-xl-mini_417586">Available</a></td>
</tr>
<tr style="height: 21.109375px;">
<td style="width: 34.722272%; height: 21.109375px;">Original Prusa <strong>MINI / MINI +</strong></td>
<td style="width: 32.026194%; height: 21.109375px;"><a href="http://help.prusa3d.com/guide/installing-wi-fi-and-prusalink-mini-_316781">built-in</a></td>
<td style="width: 33.374233%; height: 21.109375px;"><a href="http://help.prusa3d.com/guide/adding-the-printer-to-prusa-connect-mk4-s-mk3-9-s-mk3-5-s-xl-mini_417586">Available</a></td>
</tr>
</tbody>
</table>
<p> </p>
<table class="striped">
<tbody>
<tr>
<td style="width: 32.158%;"><strong>SLA printers</strong></td>
<td style="width: 32.158%;"><strong>PrusaLink</strong></td>
<td style="width: 32.162%;"><strong>Prusa Connect</strong></td>
</tr>
<tr>
<td style="width: 32.158%;">Original Prusa <strong>SL1S SPEED</strong></td>
<td style="width: 32.158%;"><a href="http://help.prusa3d.com/article/prusalink-sl1-sl1s_146094">built-in</a></td>
<td style="width: 32.162%;">TBA (work in progress)</td>
</tr>
<tr>
<td style="width: 32.158%;">Original Prusa <strong>SL1</strong></td>
<td style="width: 32.158%;"><a href="http://help.prusa3d.com/article/prusalink-sl1-sl1s_146094">built-in</a></td>
<td style="width: 32.162%;">TBA (work in progress)</td>
</tr>
</tbody>
</table>
<p> </p>
<h3>Next-gen Original Prusa printers</h3>
<p>Such as the<strong> MK4/S, MK3.9/S, MK3.5/S, XL, MINI/+, SL1/SL1S </strong> as well as the other upcoming models have the PrusaLink built-in. You can connect the printer either using Wi-Fi or a wired LAN (Ethernet) network. Note that on MINI/+, you have to first <a href="http://help.prusa3d.com/guide/installing-wi-fi-and-prusalink-mini-_316781">install the Wi-Fi module</a> to use the wireless functionality.</p>
<ul>
<li><a href="http://help.prusa3d.com/guide/wi-fi-and-prusalink-setup-mk4-mk3-9-mk3-5-xl-mini_413293">Wi-Fi and PrusaLink setup (MK4, MK3.9, MK3.5, XL, MINI/+)</a></li>
<li><a href="http://help.prusa3d.com/guide/adding-the-printer-to-prusa-connect-mk4-s-mk3-9-s-mk3-5-s-xl-mini_417586">Adding the printer to Prusa Connect (MK4, MK3.9, MK3.5, XL, MINI/+)</a> </li>
<li><a href="http://help.prusa3d.com/guide/installing-wi-fi-and-prusalink-mini-_316781">Installing Wi-Fi and PrusaLink (MINI/+)</a></li>
<li><a href="http://help.prusa3d.com/article/prusalink-sl1-sl1s_146094">PrusaLink (SL1/S)</a></li>
</ul>
<p> </p>
<h3>Original Prusa i3 MK3/S/+ or MK2.5/S</h3>
<p>In this case, the PrusaLink name also refers to the required hardware solution of a Raspberry Pi (RPi). These printers don't have enough performance, therefore additional hardware is required. PrusaLink is a replacement for the discontinued <a href="http://help.prusa3d.com/article/prusaprint-rpi-zero-and-octoprint_2180">PrusaPrint solution</a> (Octoprint and the RPi Zero W).</p>
<h4>Which Raspberry Pi should I get for my i3 (MK3/S/+ or MK2.5/S)?</h4>
<p>For your MK3/S/+, you need to get a Raspberry Pi (RPi) to make the PrusaLink and Prusa Connect work. The supported RPi boards are listed below and if you are about to purchase a new one, it is highly recommended to seek the latest generation, as the older ones might be slower.</p>
<p>On MK3/S/+, you can attach the RPi Zero <a href="http://help.prusa3d.com/guide/prusalink-and-prusa-connect-setup-mk3-s-_221744">directly onto the printer’s mainboard</a> or use the <a href="http://help.prusa3d.com/guide/prusalink-prusa-connect-with-rpi-3-4-usb-mk2-5-s-mk3-s-_469341">USB connection</a>.<br />On MK2.5/S, you have to use the <a href="http://help.prusa3d.com/guide/prusalink-prusa-connect-with-rpi-3-4-usb-mk2-5-s-mk3-s-_469341">USB connection</a> to the RPi. Then, the PrusaLink and PrusaConnect setup is fairly similar to the MK3/S/+.</p>
<p>Since the RPi doesn't have internal storage, you need to get a MicroSD card. Recommended SD card: Micro SD, SDHC standard, Class 10, 8GB or more. Preferably, choose a name-brand card known to work with RPi. Do backups regularly as even a name-brand card doesn’t guarantee you won’t lose your data. </p>
<p><strong>Supported boards (GPIO connection on Einsy Rambo)</strong></p>
<ul>
<li>Raspberry Pi Zero 2 W</li>
<li>Raspberry Pi Zero W</li>
</ul>
<p><strong>Supported boards (USB connection)</strong></p>
<ul>
<li>Raspberry Pi 4</li>
<li>Raspberry Pi 3+</li>
<li>Raspberry Pi 3</li>
</ul>
<p><strong>Unsupported boards</strong></p>
<ul>
<li>Raspberry Pi Zero (without Wi-Fi) and older</li>
<li>Raspberry Pi 2 and older</li>
</ul>
<div class="warning-callout"><strong>What not to do while RPi Zero W/2 is connected and the printer is powered up:<br /></strong><br />- Don't move any of the printer's axes by hand! Use the Move Axis menu only.<br />- Don't connect or disconnect the RPi.<br />- Don't insert or remove the microSD card inside the RPi.<br />- Don't touch the RPi board.<br />- For connecting or powering the RPi, don't use any other methods than the ones endorsed by Prusa.<br />- Only follow the guidance from the official documentation issued by Prusa Research.<br />- Prusa Research is not responsible for any damage done by or caused to third-party hardware.</div>
<p> </p>
<ul>
<li><a href="http://help.prusa3d.com/guide/prusalink-and-prusa-connect-setup-mk3-s-_221744">PrusaLink and Prusa Connect setup (MK3/S/+)</a></li>
<li><a href="http://help.prusa3d.com/guide/prusalink-prusa-connect-with-rpi-3-4-usb-mk2-5-s-mk3-s-_469341">PrusaLink/Prusa Connect with RPi 3/4 (MK2.5/S MK3/S/+)</a></li>
<li><a href="http://help.prusa3d.com/guide/how-to-update-prusalink-mk2-5-s-mk3-s-_650837">How to update PrusaLink (MK2.5/S MK3/S/+)</a></li>
</ul>
<h3><strong>Other guides related to Prusa Connect and PrusaLink:</strong></h3>
<ul>
<li><a href="http://help.prusa3d.com/guide/camera-setup-for-prusalink-prusa-connect_470943">Camera setup for PrusaLink / Prusa Connect</a></li>
<li><a href="http://help.prusa3d.com/article/camera-compatibility-rpi-prusalink_654918">Camera compatibility (RPi + PrusaLink)</a></li>
<li><a href="http://help.prusa3d.com/guide/esp-camera-for-prusa-connect_390199">ESP Camera for Prusa Connect</a></li>
<li><a href="http://help.prusa3d.com/guide/sending-files-from-prusaslicer-to-prusalink_222961">Sending files from PrusaSlicer to PrusaLink</a></li>
<li><a href="http://help.prusa3d.com/article/sending-g-codes-to-printer-via-network-prusaconnect-prusalink-octoprint_196761">Sending files from PrusaSlicer to printer via network (Prusa Connect, PrusaLink, Octoprint)</a></li>
<li><a href="http://help.prusa3d.com/guide/prusa-connect-telegram-notifications-setup_529662">Prusa Connect - Telegram notifications setup</a></li>
<li><a href="http://help.prusa3d.com/guide/prusa-connect-discord-notifications-setup_536115">Prusa Connect - Discord notifications setup</a></li>
<li><a href="http://help.prusa3d.com/guide/prusa-connect-slack-notifications-setup_536172">Prusa Connect - Slack notifications setup</a></li>
</ul>
<p> </p>
<ul>
<li><a href="http://help.prusa3d.com/article/how-to-set-a-static-ip-address_695648">How to set a static IP Address</a></li>
<li><a href="http://help.prusa3d.com/article/how-to-connect-to-rpi-via-ssh_658030">How to connect to RPi via SSH</a></li>
<li><a href="http://help.prusa3d.com/article/connecting-original-prusa-sl1-sl1s-to-prusaslicer_133977">Connecting SL1/S to PrusaSlicer</a></li>
<li><a href="http://help.prusa3d.com/article/internet-connection-sl1-sl1s_1981">Internet Connection (SL1/S)</a></li>
<li><a href="http://help.prusa3d.com/guide/wi-fi-and-prusalink-setup-xl-firmware-up-to-4-7-5_419630">Wi-Fi and PrusaLink setup (XL firmware up to 4.7.5)</a></li>
<li><a href="http://help.prusa3d.com/guide/adding-the-printer-to-prusa-connect-xl-firmware-up-to-4-7-5_420001">Adding the printer to Prusa Connect (XL firmware up to 4.7.5)</a></li>
<li><a href="http://help.prusa3d.com/article/prusa-connect-local-mini_133279">Prusa Connect Local (Firmware 4.0.5 - 4.3.4, via Ethernet, Obsolete guide) (MINI/+)</a> <br /> <br />  </li>
</ul>
<h3>Octoprint / Other / 3rd-party projects:</h3>
<ul>
<li><a href="http://help.prusa3d.com/guide/octoprint-setup-on-mk4-s-mk3-9-s-mk3-5-s-xl_646395">Octoprint setup ( MK4 / MK3.9 / MK3.5 / XL )</a></li>
<li><a href="http://help.prusa3d.com/article/octoprint-configuration-and-install_2182">Octoprint Configuration and install (MK2.5/S MK3/S/+)</a></li>
<li><a href="http://help.prusa3d.com/article/about-octoprint_1790">About Octoprint</a></li>
<li><a href="https://github.com/prusa3d/Prusa-Firmware-ESP32-Cam">ESP32 Cam for Prusa Connect (GitHub)</a></li>
</ul>


Prusa Connect and PrusaLink explained

Original Prusa XL Single-Tool (Assembled)

Original Prusa XL Single-Tool (Semi-Assembled)

Original Prusa XL Dual-Head (Assembled)

Original Prusa XL Dual-Head (Semi-Assembled)

Original Prusa XL Five-Head (Assembled)

Original Prusa XL Five-Head (Semi-Assembled)

Original Prusa XL Single-Tool to Five-Head Upgrade

Original Prusa XL Single-Tool to Dual-Head Upgrade

Original Prusa XL Dual-Head to Five-Head Upgrade

Original Prusa XL Enclosure

Assembly manuals

Basic calibration

Advanced calibration

All information you need to know to learn how to calibrate your 3D printer to achieve perfect prints.

Calibration

Printer description

Printer features

FAQs and other useful information you might be interested in before or after making your purchase at shop.prusa3d.com

General Information

Basic overview of your 3D printer and it's features, plus general Prusa Research info.

About your printer

3D models

Material guide

Printer maintenance

Prusa Connect & PrusaLink

In this section, you can find material guides, printer troubleshooting and general info about using your printer.

Using the printer

Print Quality Troubleshooting

QR Error codes

Printer troubleshooting

Description of how to recognize and solve common problems, especially hardware and electronics related.

Troubleshooting

Nozzles

Octoprint

Learn about different nozzles, Raspberry Pi connection, Octoprint and more.

3rd party accessories & Other projects

About PrusaSlicer

Configuration and profiles

User interface

Input/output

Top toolbar

Print settings

Filament settings

Advanced features

The official documentation for the PrusaSlicer slicing software. From basic configuration to advanced settings like modifier meshes.

PrusaSlicer

1. Introduction

2. Printer preparing

2. Base & Side frame assembly

2. Printer unboxing

2. Enclosure assembly

3. Printer upgrade

3. CoreXY & Back assembly

3. Printer set up

3. Nextruder disassembly

3. Detaching the Nextruder

4. Heatbed & Side panels assembly

4. PSU & electronics assembly

4. Nextruder upgrade (Multi-Tool)

4. Nextruder upgrade

4. ToolChanger assembly

5. Nextruder upgrade (Single-Tool)

5. Nextruder & accessories assembly

5. Tool-changer assembly

5. Extruder & accessories assembly

5. First run

5. ToolChanger assembly

5. Nextruder upgrade

Manual changelog XL Dual-Head (Semi-Assembled)

6. First run

6. Extruder & accessories assembly

6. Enclosure secure

Manual changelog Five-Head (Assembled)

4. First run

6. Nextruder & accessories assembly

Manual changelog XL Enclosure kit

Manual changelog XL Dual-Head (Assembled)

Manual changelog

7. First run

6. PSU & electronics assembly

Manual changelog XL (Dual-Head to Five-Head upgrade)

7. Nextruder & accessories assembly

Manual changelog (Single-Tool to Dual-Head Upgrade)

8. First run

Manual changelog Five-Head (Semi-Assembled)

Manual changelog XL (Single-head to Five-head upgrade)

2A. Printer Unboxing

2B. Printer Unboxing

Prusa Connect &amp; PrusaLink

<p>PrusaSlicer separates the printer connection settings from the Printer profile into a <strong>Physical printer</strong> profile.</p>
<p>You can create a new Physical profile by clicking <em><strong>Add printer</strong></em> in the printer profile select box or by clicking the cog icon and picking <strong><em>Add physical printer</em></strong>.</p>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2021/01/physical.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2021/01/physical-600x181.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/01/physical-800x241.jpg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/01/physical-300x90.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/01/physical-768x231.jpg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/01/physical-1536x463.jpg 1536w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/01/physical-2048x617.jpg 2048w" alt="" width="503" height="152" loading="lazy" /></p>
<p>In the Physical printer dialog, you can name the printer and assign it one <strong>or more</strong> printer profiles. If you're using, for example, the MMU2S upgrade, you only have to set one physical printer, but you can have both Single mode and MMU profiles linked to it.</p>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2021/01/physical-printer.png" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2021/01/physical-printer-600x337.png 600w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/01/physical-printer-800x449.png 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/01/physical-printer-300x168.png 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/01/physical-printer-768x431.png 768w" alt="" width="561" height="315" loading="lazy" /></p>
<p>If you have a Physical printer with network info filled out selected as your current printer, you can send generated G-codes directly to your device.</p>
<h3>PrusaConnect</h3>
<p>If you'd like to send files to your printer via PrusaConnect, add a Physical printer or Edit an existing one.</p>
<p>Select <em><strong>PrusaConnect</strong></em> from the select box as the <em><strong>Host</strong></em><strong> type</strong><em>.</em> The hostname/IP will be automatically filled, you don't have to change it.</p>
<p><img decoding="async" loading="lazy" src="https://cdn.help.prusa3d.com/wp-content/uploads/2023/04/a6e53887e520db647ad830515ac5fb8a.png" sizes="(min-width: 1024px) 820px, 100vw" srcset="Sending G-codes to printer via network (PrusaConnect, PrusaLink, Octoprint)" alt="" width="1121" height="711" /></p>
<p>To find your API key, go to PrusaConnect, select the printer you want to send the files to, go to the <em><strong>Settings </strong></em>tab and scroll down to he <em><strong>API keys </strong></em>section. Copy <em><strong>PrusaConnect API key</strong></em> to the Physical printer window and confirm with OK.</p>
<p><strong><img decoding="async" loading="lazy" src="https://cdn.help.prusa3d.com/wp-content/uploads/2023/04/6b5c2148f1bc36255fed667a753a2c50_painted.png" sizes="(min-width: 1024px) 820px, 100vw" srcset="Sending G-codes to printer via network (PrusaConnect, PrusaLink, Octoprint)" alt="" width="1600" height="1054" /></strong></p>


Sending G-codes to printer via network (PrusaConnect, PrusaLink, Octoprint)

<h3>What happened? </h3>
<p>During the configuration of <strong>Prusa Connect</strong> on the <strong>Original Prusa MINI/+</strong>, <strong>MK4/S</strong>, <strong>MK3.9/S, MK3.5/S</strong> or <strong>XL</strong> an error on this configuration can occur and the printer shows the message "<strong>Registration to Prusa Connect failed due to: ~</strong>". In place of <strong>~</strong>, a text with more details is shown, from the list below. Depending on the specific shown text, there are different causes and fixes. </p>
<p>Error name: Connect Registration Failed</p>
<p>Error code: #12401 (MINI), #13401 (MK4), #26401 (MK4S), #21401 (MK3.9), #23401 (MK3.5), #17401 (XL)</p>
<h4>DNS error</h4>
<p>The printer wasn't able to resolve the <strong>hostname</strong> of the Prusa Connect server into an IP address. The hostname is a unique label assigned to a device connected to a network. </p>
<ul>
<li>The printer is not connected to the network at all.</li>
<li>In case of a <strong>static</strong> configuration (non-DHCP), the <strong>DNS server</strong> is not configured or configured incorrectly.</li>
<li>The local DNS server is currently not working.</li>
<li>The Connect hostname is reconfigured to some that doesn't exist. For example, this can occur if loading a .ini file with an invalid configuration.</li>
</ul>
<h4>Refused</h4>
<p>It's not possible to reach the server on the network level, hence it is not possible to establish a TCP connection. The system is either not answering at all or actively refuses the connection. </p>
<ul>
<li>The internet connection is not working, or a firewall blocks the communication.</li>
<li>In the case of a <strong>static</strong> configuration (non-DHCP), the <strong>gateway </strong>(typically, this is the IP address of the router) is not configured or configured incorrectly. </li>
<li>The Connect server is under maintenance. </li>
<li>Too many TCP connections are open with the printer, for example in PrusaLink. </li>
</ul>
<h4>TLS error</h4>
<p>This message points to an error doing a <strong>SSL/TLS handshake</strong>. This handshake is the process to create a safe and encrypted connection. </p>
<ul>
<li>Time is not synchronized on the printer (MINI/+). The time synchronization occurs for each internet connection, through the <a href="http://help.prusa3d.com/article/ntp-server-mini_151132">NTP server</a>. It is possible this might take more time than initially expected, or rarely, that there might be issues with the server. </li>
<li>A restrictive firewall (for example but not limited to a corporate proxy firewall) may restrict an automatic access to the NTP server. In that case, it will be necessary to manually allow the printer to access the NTP server.</li>
<li>Something in the path is trying to tamper with the communication, for example but not limited to an attack. </li>
</ul>
<h4>Unauthorized</h4>
<p>The server claims that the printer is not authorized. The printer is not recognized as an Original Prusa. </p>
<h4>Server error</h4>
<p>The server is returning a <strong>500 Internal Server Error</strong> or similar. The issue is on the Connect side, and is expected to be fixed on its own. </p>
<h4>Internal error</h4>
<p>This error is caused by an issue related to the printer firmware. </p>
<h4>Network error</h4>
<p>Similar to the Refused error, but the connection dropped after it was initialized. </p>
<ul>
<li>Glitchy internet connection.</li>
<li>The <strong>latency</strong> to the Connect servers is too high. A geographic location is very far from our Connect servers can contribute to this cause.</li>
<li>The Connect server is temporarily down.</li>
</ul>
<h4>Protocol error</h4>
<p>The response from the server is not recognized.</p>
<ul>
<li>Bug on the server side. This cause is on our side and expected to be fixed on its own. </li>
<li>Too old firmware on the printer and it's no longer supported.</li>
<li>A misconfiguration from the <strong>.ini file</strong> loaded on the printer, connecting to something different than our Connect server.</li>
</ul>
<h3>How to fix it? </h3>
<h4>DNS error, Refused</h4>
<p>Ensure that the printer is connected to the internet. In case of a static (non-DHCP) connection, ensure the correct settings are there, or test a DHCP connection. Also, check the .ini configuration file, and in case, rewrite the file. </p>
<p>If the previous steps didn't fix the issue, attempt a <a href="http://help.prusa3d.com/article/factory-reset-mini_177516">factory reset</a>. </p>
<h4>TLS error</h4>
<p>Reattempt the Connect registration, after the printer is connected to the internet for a few more minutes. </p>
<p>If the previous step didn't fix the issue, double-check your network <strong>firewall</strong>. Some firewalls will need for the NTP server to be allowed manually. The specific steps will depend on your specific firewall, we recommend checking your firewall documentation. </p>
<h4>Unauthorized</h4>
<p>If your printer is not an Original Prusa printer, it cannot use our Prusa Connect service.</p>
<p>In case your printer is an Original Prusa, <a href="http://help.prusa3d.com/article/firmware-updating-mini-mini_124784"> re-flash or update its firmware</a>. </p>
<h4>Server error</h4>
<p>A server error indicates an issue from our side. The issue will be fixed on its own, try registering again to Prusa Connect later. </p>
<h4>Internal error</h4>
<p><a href="http://help.prusa3d.com/article/firmware-updating-mini-mini_124784">Re-flash or update the printer firmware</a>. If this does not solve the issue, take note if the printer might have other issues, even if not directly related. </p>
<h4>Network error</h4>
<p>Ensure that your internet connection is stable and not glitchy. To confirm whether an inconsistent internet connection caused the issue, test another connection, if available, such as a hotspot from your mobile phone. </p>
<h4>Protocol error</h4>
<p>Ensure that the printer is running our latest firmware version. If it is running an old version, update the firmware. Also, check the .ini configuration file, and in case, rewrite the file.</p>


Connect Registration Failed

<p>Prusa Connect's <strong>Open API</strong> allows for seamless integration of third-party cameras, allowing you to link your camera to the given printer in Prusa Connect to retrieve images (snapshots). The documentation provides instructions on:</p>
<ul>
<li>How to register camera to Prusa Connect</li>
<li>How to upload snapshot to Connect</li>
<li>How to update camera attributes</li>
</ul>
<div class="tip-callout">This <strong>API is designed for developers</strong>, facilitating the creation of custom third-party camera / image capture systems.</div>
<p>For more information, continue to the <a href="https://connect.prusa3d.com/docs/cameras/#tag/cameras" target="_blank" rel="noopener">Prusa Connect Camera API documentation</a>.</p>


Prusa Connect - Camera API

<p>The first version of the Prusa app offers the option of using <a href="http://help.prusa3d.com/article/prusa-connect-and-prusalink-explained_302608">Prusa Connect</a> from your smartphone.</p>
<p>The app includes observational features for printers and teams, a basic direct print option, working with NFC, and notifications.</p>
<table style="border-collapse: collapse; width: 100.0%;" border="0">
<tbody>
<tr>
<td style="width: 32.1456%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/08/fe7addf7feadff10241b27ebc7315257.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Prusa Mobile App" alt="" width="266" height="539" loading="lazy" /></td>
<td style="width: 32.1456%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/08/1a91a7a7c0a4011ed76a0e9c63d45fa3.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Prusa Mobile App" alt="" width="266" height="539" loading="lazy" /></td>
<td style="width: 32.1456%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/08/6c783da5123b7acc8eb1b01b0235d61d.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Prusa Mobile App" alt="" width="266" height="540" loading="lazy" /></td>
</tr>
</tbody>
</table>
<h3>Download</h3>
<table style="border-collapse: collapse; width: 100%; height: 359.5px;">
<tbody>
<tr style="height: 265.5px;">
<td style="width: 50%; text-align: center; height: 265.5px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/08/6ffff0db4d7540490652498bbc83abdc_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Prusa Mobile App REVIEW" alt="" width="350" height="263" loading="lazy" /></td>
<td style="width: 50%; text-align: center; height: 265.5px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/08/26d9f98d9d94c036bcc68bb7c0ef4962_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Prusa Mobile App REVIEW" alt="" width="350" height="263" loading="lazy" /></td>
</tr>
<tr style="height: 73px;">
<td style="width: 50%; text-align: center; height: 73px;"><a href="https://apps.apple.com/us/app/prusa/id6477531937?platform=iphone" target="_blank" rel="noopener"> <img decoding="async" style="height: 65px; width: 186px;" src="https://developer.apple.com/assets/elements/badges/download-on-the-app-store.svg" alt="Download on the App Store" /> </a></td>
<td style="width: 50%; text-align: center; height: 73px;"><a href="https://play.google.com/store/apps/details?id=com.prusa3d.connect" target="_blank" rel="noopener"> <img decoding="async" style="height: 72px; width: 221px;" src="https://upload.wikimedia.org/wikipedia/commons/7/78/Google_Play_Store_badge_EN.svg" alt="Get it on Google Play" /> </a></td>
</tr>
</tbody>
</table>
<h3>What can the Prusa app do?</h3>
<ul>
<li><strong>Printers: </strong>easy monitoring of printers and their current statuses</li>
<li><strong>Jobs: </strong>overview of current and historical print jobs, up-to-date telemetry</li>
<li><strong>Notifications: </strong>Notification of important events and statuses of your printers and jobs directly on your mobile phone, both as a "push" and a notification screen</li>
<li><strong>Wi-Fi Printer Setup with NFC: </strong>NFC makes it quick and easy to set up Wi-Fi connectivity for your new MK4S printers</li>
<li><strong>Adding a printer: </strong>You can easily add new printers under your account, to your team and manage them</li>
</ul>
<h3>Features to be improved</h3>
<p>You are welcome to try these features, but they are still being improved:</p>
<ul>
<li><strong>Starting printing from the cloud:</strong> Start a print job directly from the cloud</li>
<li><strong>Printables integration: </strong>Basic integration with the Printables.com platform where you can find the model you want and directly start printing on any of your printers </li>
</ul>
<h3>Platforms </h3>
<p>The Prusa mobile app is available on both major platforms - Apple iOS and Android to support the widest range of users.</p>
<h3>Languages</h3>
<p>The app is available in all major languages:</p>
<ul>
<li>English</li>
<li>Czech</li>
<li>German</li>
<li>Italian</li>
<li>Spanish</li>
<li>French</li>
<li>Polish</li>
</ul>
<div class="note-callout"><strong>We are intensively developing the Prusa mobile app with new features and improving the current ones.</strong></div>


Prusa Mobile App

<h3>What happened? </h3>
<p>During the configuration of <strong>Prusa Connect</strong> on the <strong>Original Prusa XL</strong>, an error on this configuration can occur and the printer shows the message "<strong>Registration to Prusa Connect failed due to: ~</strong>". In place of ~, a text with more details is shown. </p>
<p>Error name: Connect Registration Failed</p>
<p>Error code: #17401</p>
<h3>How to fix it? </h3>
<p>Follow the instructions in the <a href="http://help.prusa3d.com/article/connect-registration-failed_654926">Connect Registration Failed guidepost</a>, common to our printers with Buddy firmware, with more details on possible causes for this error and their solutions. </p>


Connect Registration Failed #17401 (XL)

<div class="warning-callout">This article is intended for experienced users only!</div>
<p>When using <strong>PrusaLink</strong>, you connect to your printer via its <strong>IP address</strong>, which is assigned to it by the<strong> DHCP</strong> server on your network. Sometimes, if your printer disconnects and reconnects, it may receive a different IP address from the DHCP server. This can cause connection issues if you're trying to access the printer using its previous IP address, which is no longer valid.</p>
<h4>How to solve it?</h4>
<p>Set your router's DHCP to consistently assign the same IP address to a device based on its MAC address.</p>
<p>The MAC address is available in the menu <strong>System &gt; Network</strong>. Note that it differs for the Ethernet or the Wi-Fi.</p>
<p>This alone should be enough to prevent the IP address from changing over time.</p>
<p>Furthermore, you can set up your printer to use a static IP address instead of requesting to be given the IP Address from the DHCP server. </p>
<p>To set a static IP address on the printer, you can enter the IP address, network mask, gateway, and specify the DNS server in the prusa_printer_settings.ini configuration file:</p>
<p> </p>
<p>[eth::ipv4] <br />type=static <br />addr=192.168.0.42 <br />mask=255.255.255.0 <br />gw=192.168.0.1 </p>
<p>[network] <br />dns4=1.1.1.1;8.8.8.8</p>
<p> </p>
<p> </p>
<p>Copy this file to a USB drive and upload it to the printer via the menu <strong>Settings &gt; System &gt; Load Settings from File</strong>. This will load all the settings from the .ini file. (Note, this is a different menu than "load settings" for Wi-Fi settings, which only uploads Wi-Fi data.) Afterward, restart the printer.</p>
<p>Be careful, you need to reserve the given IP address in the router's settings for the printer to avoid potential IP address conflicts.</p>
<p>For setting a static IP address for Wi-Fi instead of the Ethernet, the process is exactly the same, but instead of [eth::ipv4] use [wifi::ipv4].</p>


How to set a Static IP Address

Adding the printer to Prusa Connect (XL firmware up to 4.7.5)

ESP Camera for Prusa Connect

Wi-Fi and PrusaLink setup (MK4, MK3.9, MK3.5, XL, MINI/+)

Adding the printer to Prusa Connect (MK4/S, MK3.9/S, MK3.5/S, XL, MINI/+)

Camera setup for PrusaLink / Prusa Connect

Wi-Fi and PrusaLink setup (XL firmware up to 4.7.5)

Prusa Connect - Telegram notifications setup

Prusa Connect - Discord notifications setup

Prusa Connect - Slack notifications setup


<ul>
<li>Initial release for Original Prusa XL</li>
</ul>


1.00

4.5.3


<ul>
<li>Improved 'Monotonic lines' fill pattern</li>



<li>Improved Acceleration control</li>



<li>Specific object arrangement for XL</li>



<li>Original Prusa XL profiles</li>



<li>Updated translations</li>



<li>Bugfixes</li>
</ul>


2.5.1


<ul>
<li>Original Prusa MK4 profiles</li>
</ul>


2.5.2


<ul>
<li>New Home screen </li>



<li>Homing improvements</li>



<li>Changes to Live Adjust Z</li>



<li>Footer Items settings improved&nbsp;</li>



<li>Prusa Connect and PrusaLink improvements</li>



<li>Improvements to the Factory Reset feature&nbsp;</li>



<li>Calibrations and Tests on improvements</li>



<li>Tool changer usage statistics</li>



<li>Bugfixes</li>
</ul>


4.6.1


<p>Updated with information for semi-assembled XL</p>


1.02


<ul>
<li>Organic supports</li>



<li>Automatic support painter</li>



<li>Text embossing tool</li>



<li>Improved cut tool</li>



<li>Adding connectors and dowel pins</li>



<li>Measurement tool</li>



<li>Dynamic overhang speed</li>



<li>Improved Ensure vertical shell thickness</li>



<li>Smart extending of sparse infill</li>
</ul>


2.6.0


<ul>
<li>Multi-tool support</li>



<li>Other improvements</li>



<li>Bug fixes</li>
</ul>


4.7.0


<ul>
<li>Single tool G-code on a multi tool printer</li>



<li>Known Bugs</li>
</ul>


4.7.1


<ul>
<li>Custom nozzle diameter</li>



<li>Temperature menu reordered</li>
</ul>


4.7.2


<ul>
<li>Updated with instructions for the Original Prusa PDU</li>
</ul>


1.03


<ul>
<li>New Arrange tool options</li>



<li>New Cut tool options</li>



<li>Per-symbol text projection on surface</li>



<li>Interlocking of painted areas for MMU printing</li>
</ul>


2.6.1

4.7.5


<ul>
<li>New SVG support</li>



<li>Binary G-Code (.bgcode) export support + conversion</li>



<li>Arc fitting support </li>
</ul>


2.7.0


<ul>
<li>Printing speed boost with Input Shaper and Pressure Advance (XL and MINI)</li>



<li>Major updates to network code; Instant Printing feature</li>



<li>Major updates to Prusa Connect and network communication</li>



<li>Introducing a new efficient open-source Binary G-code format</li>



<li>New useful pre-print screen for XL Multi-Tool printers</li>



<li>Cancel object directly from the printer’s menu</li>
</ul>


5.1.0


<ul>
<li>Binary G-code settings</li>



<li>Wipe tower weight</li>



<li>Bug fixes</li>
</ul>


2.7.1


<ul>
<li>Nozzle diameter in Selftest (XL)</li>



<li>Wipe tower info added (XL)</li>



<li>Sending crash dumps to Tech support</li>



<li>New bootloader 2.3.4</li>



<li>Firmware flashing updated</li>



<li>Bug fixes</li>
</ul>


5.1.2


<ul>
<li>Update on the change from 0.6 mm nozzle diameter to 0.4 mm as default.</li>
</ul>


1.04


<ul>
<li>Smarter color painting</li>



<li>Improved Color change</li>



<li>Ramping travel moves</li>



<li>SLA material overrides</li>
</ul>


2.7.2


<ul>
<li>Improvements to multi-material printing</li>



<li>Vase mode smoothing</li>



<li>Support for 3MF files generated in BambuStudio</li>



<li>Metadata with boundary polygon of each object</li>
</ul>


2.7.3


<ul>
<li>Objects from 3MFs generated by BambuStudio now retain multimaterial painting when loaded</li>



<li>Fixed a bug where downloading files from Printables did not work when enabled in Preferences</li>
</ul>


2.7.4


<ul>
<li>Phase Stepping &amp; Calibration</li>



<li>Touch support</li>



<li>Stuck filament detection</li>



<li>Stealth mode&nbsp;</li>



<li>Time Zone settings updated</li>



<li>Filament Sensor Options</li>



<li>RGB Side Strip Dimming</li>



<li>Improvements by Prusa community</li>



<li>Bug fixes</li>
</ul>


6.0.0


<ul>
<li>Japanese language support (MK4, MK3.9, MK3.5, XL)</li>



<li>Phase stepping fixes (XL)</li>



<li>Nozzle cleaning repaired (MK4, MK3.9, XL)</li>



<li>Stealth mode corrected (MK4, MK3.9, MK3.5, XL)</li>
</ul>


6.0.1


<ul>
<li>Original Prusa XL Enclosure functions (XL)</li>



<li>Improvements by Prusa community</li>
</ul>


6.0.2


<ul>
<li>Interim solution of USB disconnect issues (MK4, MK3.9, MK3.5, XL)</li>
</ul>


6.0.3


<ul>
<li>Prusa Connect integration</li>



<li>Prusa Account integration</li>



<li>Improved UI</li>



<li>Improved G-code Viewer</li>



<li>New system profile updating system</li>



<li>Single Perimeter for top and bottom layers</li>



<li>Extended SLA layer separation configuration</li>



<li>Bug fixes</li>
</ul>


2.8.0


<ul>
<li>Modified MCU overheat&nbsp; (XL)</li>



<li>Bug fixes</li>
</ul>


6.0.4


<ul>
<li>Support for MK3.9S and MK3.5S printers</li>



<li>Numeric keyboard</li>



<li>Custom names for steel sheet</li>



<li>User-configurable hostname</li>



<li>Binary G-code check</li>



<li>ESP firmware flash during boot (MINI, MK3.5/S, MK3.9/S, MK4/S)</li>



<li>New bootloader 2.3.5</li>



<li>Network Status screen</li>



<li>Steel sheet name in footer (MK3.5/S)</li>



<li>Powered Z-motors during calibration procedure (MK3.5/S, MK3.9/S, MK4/S)</li>



<li>Default nozzle diameter set to 0.4 (XL)</li>



<li>Bug fixes</li>
</ul>


6.1.2


<ul>
<li>Issues with numeric keyboard repaired (MK4/S, MK3.9/S, MK3.5/S, XL)</li>



<li>Returned nozzle diameter setup (XL)</li>



<li>Printhead position during calibrations changed (MK4/S, MK3.9/S, MK3.5/S)</li>



<li>Cold pull (XL)</li>
</ul>


6.1.3


<ul>
<li>Improved menu bar, the menu no longer hides under a button</li>



<li>Two new parameters (Abrasive material and High flow nozzle) for G-Code checks</li>



<li>Improved automatic orientation of bridges</li>



<li>Number of bugfixes</li>
</ul>


Original Prusa XL