EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

Original Prusa SL1

Calibration

Articles

QR Error codes

QR Error codes

Calibration > Calibration Error Messages
SL1 Tilt-mechanism error

SL1 Tilt-mechanism error

Calibration > Calibration Error Messages
Tilt homing failed #10101 (SL1/SL1S)

Tilt homing failed #10101 (SL1/SL1S)

Calibration > Calibration Error Messages

Selftest (SL1)

Calibration > Basic calibration
Tower homing failed #10102 (SL1/SL1S)

Tower homing failed #10102 (SL1/SL1S)

Calibration > Calibration Error Messages
Tilt endstop not reached #10115 (SL1/SL1S)

Tilt endstop not reached #10115 (SL1/SL1S)

Calibration > Calibration Error Messages
Tilt check failed #10119 (SL1/SL1S)

Tilt check failed #10119 (SL1/SL1S)

Calibration > Calibration Error Messages
Internal error (DBUS mapping failed) #10507 (SL1/SL1S)

Internal error (DBUS mapping failed) #10507 (SL1/SL1S)

Calibration > Calibration Error Messages
Tower endstop not reached #10114 (SL1/SL1S)

Tower endstop not reached #10114 (SL1/SL1S)

Calibration > Calibration Error Messages
Tilt position invalid #10121 (SL1)

Tilt position invalid #10121 (SL1)

Calibration > Calibration Error Messages
Printer is not UV calibrated #10308 (SL1)

Printer is not UV calibrated #10308 (SL1)

Calibration > Calibration Error Messages
Speaker test failed #10310 (SL1/SL1S)

Speaker test failed #10310 (SL1/SL1S)

Calibration > Calibration Error Messages
UV intensity too low #10318 (SL1/SL1S)

UV intensity too low #10318 (SL1/SL1S)

Calibration > Calibration Error Messages
Fan RPM not in range #10122 (SL1/SL1S)

Fan RPM not in range #10122 (SL1/SL1S)

Calibration > Calibration Error Messages
Boot slot changed #10601 (SL1/SL1S)

Boot slot changed #10601 (SL1/SL1S)

Calibration > Calibration Error Messages
This Wizard cannot be canceled #10522 (SL1/SL1S)

This Wizard cannot be canceled #10522 (SL1/SL1S)

Calibration > Calibration Error Messages
Cannot set update channel #10513 (SL1/SL1S)

Cannot set update channel #10513 (SL1/SL1S)

Calibration > Calibration Error Messages
Tower moving failed #10103 (SL1/SL1S)

Tower moving failed #10103 (SL1/SL1S)

Calibration > Calibration Error Messages
Tower position error #10123 (SL1/SL1S)

Tower position error #10123 (SL1/SL1S)

Calibration > Calibration Error Messages
UV intensity too high #10317 (SL1/SL1S)

UV intensity too high #10317 (SL1/SL1S)

Calibration > Calibration Error Messages
Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to info@prusa3d.com or through the button below.