プリント品質のトラブルシューティング

プリントが出ない/レジンが硬化しない

If the print does not appear on the printing platform, nor at the bottom of the resin tank, there are a couple of possible causes: Highly insufficient exposure times Old or separated…

プリントがプラットフォームから外れてしまう

The printing platform must be perfectly flat and degreased to ensure that the first prints are properly attached. If the pad or print itselfs separates from the printing platform,…

Skewed / deformed prints (SL1/SL1S)

A skewed/deformed print is usually caused by loose screws – either the large black knob at the top of the cantilever, the screw(s) on the cantilever itself or the resin tank screws. Solution Cantilever…