Starting firmware version 3.9.0, for the Original Prusa MK3S manufactured after June 2019, it is possible to adjust the brightness of the screen directly from the LCD menu and also have the option of dynamic lighting, triggered by navigating the LCD menu.
Printers received before June 2019 including the MK3 model may not have the compatible components for this feature. EinsyRambo rev. 1.1a, and an LCD panel supplied after June 2019 is required. These can be purchased in our eshop (note that you have to be logged in).
Auto - LCD display goes from 'Level Dimmed' value to the 'Level Bright' value when interacted with.
Bright - LCD brightness level always on the Level Bright Value
Dim - LCD brightness level always on the Level Dimmed Value
All parameters can be found under Settings -> Brightness, on the LCD-menu.
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.