IF YOU HAVE PUT YOUR MK3S+ IN AN ENCLOSURE STOP RIGHT HERE, AND I HOPE YOU ARE READING THIS BEFORE YOU COMPLETE YOU ORDER! PRUSA HAS TOTALLY DROPPED THE BALL HERE. YOU ARE GOING TO NEED AT LEAST A NEW PSU QUICK DISCONNECT CABLE ASSEMBLY THAT COST $47.00 PLUS SHIPPING!
This assembly manual does not address the changes needed to upgrade an MK3S+ already mounted in an enclosure! What are the specific details to upgrade a printer in the enclosure. My main question revolves around the changes with the PSU. It is no longer mounted directly on the printer, but is now located on the back of the closure. My belief is that there should be a whole separate assembly manual for the enclosure/printer combo. What say you Prusa! Let's wake up and pay attention to your customers. Remember a squeaky wheel needs oiling.
1 comment
This assembly manual does not address the changes needed to upgrade an MK3S+ already mounted in an enclosure! What are the specific details to upgrade a printer in the enclosure. My main question revolves around the changes with the PSU. It is no longer mounted directly on the printer, but is now located on the back of the closure. My belief is that there should be a whole separate assembly manual for the enclosure/printer combo. What say you Prusa! Let's wake up and pay attention to your customers. Remember a squeaky wheel needs oiling.