Prusa CORE One L

Using the printer

Prusa Connect and PrusaLink explained

Prusa Connect and PrusaLink are two remote printing solutions developed in-house by Prusa. Its origin is in the management system used in our record-sized print farm located in…

Read the article

Modeling with 3D printing in mind

Modeling for 3D printing presents several interesting challenges. FFF (Fused Filament Fabrication), with its layer-by-layer manufacturing process, the orientation and geometry…

Read the article

How to downgrade firmware (CORE One/+, MK4/S, MK3.9/S, MK3.5/S, XL)

Sometimes it is necessary to reinstall an older version of the firmware. The method to update the firmware only allows newer firmware versions to be flashed. To flash the same…

Read the article

Changing or replacing the Nextruder Hotend

Installing or changing the Nextruder V6 Nozzle Adapter

Regular printer maintenance (CORE One L)

Prusament PETG Ultraglow troubleshooting

ESP Camera for Prusa Connect

Wi-Fi and Prusa Connect/Link setup (CORE One, MK4/S, MK3.9, MK3.5, XL, MINI/+)

Adding the printer to Prusa Connect (CORE One, MK4/S, MK3.9/S, MK3.5/S, XL, MINI/+)

Prusa Connect - Telegram notifications setup

Prusa Connect - Discord notifications setup

Prusa Connect - Slack notifications setup

How to install the Nextruder V6 nozzle adapter (CORE One L/+)

How to replace the Prusa Nozzle (CORE One L)

How to replace a hotend assembly (CORE One L)

How to replace the hotend fan (CORE One L)

How to replace the side filament sensor (CORE One L)

How to replace the door sensor (CORE One L)

How to install the Advanced Filtration (CORE One L)

How to replace the Buddy3D camera cable (CORE One L)

How to replace a Hotend Heater (CORE One L)

How to replace a Heatsink Thermistor (CORE One L)

How to replace Nextruder Filament Sensor (CORE One L)

How to replace the print fan (CORE One L)

How to replace the Accelerometer (CORE One L)

How to replace Hotend Heatsink (CORE One L)

How to reverse the door orientation (CORE One L)

How to replace LoveBoard (CORE One L)

How to replace a Hotend Thermistor (CORE One L)

How to replace the White LED strip (CORE One L)

How to pack CORE One L for return

How to replace the heatbed fans (CORE One L)

How to replace the heatbed (CORE One L)

How to replace the AC box (CORE One L)

How to rebuild the Nextruder Hotend

How to install HT Hotend Upgrade (CORE One/+, CORE One L/+)

How to install Prusa OpenPrintTag upgrade (CORE One+/CORE One L)

How to replace a HT Hotend Thermistor

How to replace a HT Hotend Heater

How to replace the Prusa Nozzle (HT Hotend)

How to replace the main cable (CORE One L/+)