1. Tools necessary for this chapter

Prusa INDX Conversion kit for the Prusa CORE One/+ [Traduzione in corso] (1.00)

• 1. Introduction
• 2. Printer preparation & disassembly
• 3. Z-axis upgrade [Traduzione in corso]
  1. Tools necessary for this chapter
  2. Optional: Installing the Buddy3D Camera USB-C cable
  3. Removing the heatbed cable cover
  4. Releasing the heatbed
  5. Removing the heatbed
  6. Heatbed spacers: parts preparation
  7. Inserting the spacer - left
  8. Securing the bed spacer - left
  9. Inserting the spacer - right
  10. Securing the bed spacer - right
  11. Removing the rear bed spacer
  12. Assembling the INDX-bed-spacer-rear
  13. Mounting the INDX-bed-spacer-rear
  14. Offset sensor: parts preparation
  15. Mounting the INDX offset sensor
  16. Connecting the offset sensor cable
  17. Securing the offset sensor assembly
  18. Guiding the offset sensor cable
  19. Securing the offset sensor cable
  20. Removing the Bed-cable-cover-bottom
  21. Heatbed cable covers: parts preparation
  22. Assembling the Bed-cable-cover-bottom
  23. Securing the heatbed: parts preparation
  24. Inserting the heatbed
  25. Securing the heatbed
  26. Wrapping the heatbed cables
  27. Covering the heatbed cables
  28. Guiding the heatbed cable bundle I.
  29. Guiding the heatbed cable bundle II.
  30. Securing the textile sleeve
  31. Removing the Bed-stop-rear
  32. INDX-C1-Bed-stop-rear: parts preparation
  33. Assembling the Bed-stop-rear
  34. Installing the new Bed-stop-rear
  35. Securing the Bed-stop-rear
  36. Connecting the RGB LED + offset sensor cables
  37. Connecting the heatbed cables
  38. Haribo time
  39. Done
• 4. Sensore filamento laterale & Testina INDX
• 5. Portabobine e gruppo di dock degli strumenti
• 6. Preflight check