1. Begin assembly

Printer maintenance

• How to replace Heatbed (CORE One)
• How to replace Heatbed Thermistor (CORE One)
• Buddy3D Camera for CORE One Installation
• How to replace the Prusa Nozzle (CORE One)
• How to reverse the door orientation (CORE One)
• How to pack the Prusa CORE One for return - Original Packing material
• How to install Advanced Filtration (CORE One)
• How to pack the Prusa CORE One for return - Custom Packing material
• How to replace the xBuddy board (CORE One)
• How to replace Nextruder Filament Sensor (CORE One)
• How to replace Heatsink NTC Thermistor (CORE One)
• How to replace Hotend Heatsink (CORE One)
• How to replace the print fan (CORE One)
  1. Begin assembly
  2. Introduction
  3. Introduction components
  4. Tools necessary for this chapter
  5. Printer Preparation (Part 1)
  6. Printer Preparation (Part 2)
  7. Top Cover Removal
  8. Heatbed Protection
  9. Nextruder Uncovering
  10. Removing the cables
  11. Print fan removal
  12. Print fan parts preparation
  13. Attaching the print fan
  14. Nextruder cover
  15. Top Cover
  16. Turning the Printer On
  17. Final check
• How to replace the Heatbed Power Cables (CORE One)
• How to replace a Hotend Thermistor (CORE One)
• How to replace a Hotend Heater (CORE One)
• How to replace the Belt Tensioner Pulley (CORE One)
• How to replace the Belt Tensioner Left (CORE One)
• How to replace the Belt Tensioner Right (CORE One)
• How to replace a hotend assembly (CORE One)
• How to install the Nextruder V6 Nozzle Adapter (CORE One)
• How to replace the door sensor (CORE One)
• How to replace the side filament sensor (CORE One)