1. Begin assembly

Printer maintenance

• How to replace Heatbed (CORE One)
• How to replace Heatbed Thermistor (CORE One)
• Buddy3D Camera for CORE One Installation
• How to replace the Prusa Nozzle (CORE One)
• How to reverse the door orientation (CORE One)
• How to pack the Prusa CORE One for return - Original Packing material
• How to install Advanced Filtration (CORE One)
• How to pack the Prusa CORE One for return - Custom Packing material
• How to replace the xBuddy board (CORE One)
• How to replace Hotend fan (CORE One)
• How to replace Nextruder Filament Sensor (CORE One)
• How to replace Heatsink NTC Thermistor (CORE One)
• How to replace Hotend Heatsink (CORE One)
• How to replace X and Y Motors (CORE One)
• How to replace the print fan (CORE One)
• How to replace the Heatbed Power Cables (CORE One)
• How to replace the Chamber fan (CORE One)
  1. Begin assembly
  2. Introduction
  3. Tools necessary for this chapter
  4. Printer preparation
  5. Removing the printer top cover
  6. Protecting the heatbed
  7. Removing the side cover
  8. Removing the side panel
  9. Removing back cover
  10. Removing xBuddy cover
  11. Disconnecting the cables
  12. Removing the chamber fans
  13. Preparing parts
  14. Placing the chamber fans
  15. Placing the fan grid assembly
  16. Securing the fans
  17. Connecting the cables
  18. Covering the buddy box
  19. Installing the back cover
  20. Installing the side cover
  21. Turning the printer on
  22. Final check
• How to replace a Hotend Thermistor (CORE One)
• How to replace a Hotend Heater (CORE One)
• How to replace the Belt Tensioner Pulley (CORE One)
• How to replace the Belt Tensioner Left (CORE One)
• How to replace the Belt Tensioner Right (CORE One)
• How to replace Loveboard (CORE One)
• How to replace a hotend assembly (CORE One)
• How to install the Nextruder V6 Nozzle Adapter (CORE One)
• How to replace the door sensor (CORE One)
• How to replace the side filament sensor (CORE One)