1. Begin assembly

Printer maintenance

• How to replace Heatbed (CORE One)
• How to replace Heatbed Thermistor (CORE One)
• Buddy3D Camera for CORE One Installation
• How to replace the Prusa Nozzle (CORE One)
• How to reverse the door orientation (CORE One)
• How to pack the Prusa CORE One for return - Original Packing material
• How to install Advanced Filtration (CORE One)
• How to pack the Prusa CORE One for return - Custom Packing material
• How to replace the xBuddy board (CORE One)
• How to replace Nextruder Filament Sensor (CORE One)
• How to replace Heatsink NTC Thermistor (CORE One)
• How to replace Hotend Heatsink (CORE One)
• How to replace the print fan (CORE One)
• How to replace the Heatbed Power Cables (CORE One)
• How to replace a Hotend Thermistor (CORE One)
• How to replace a Hotend Heater (CORE One)
• How to replace the Belt Tensioner Pulley (CORE One)
• How to replace the Belt Tensioner Left (CORE One)
• How to replace the Belt Tensioner Right (CORE One)
  1. Begin assembly
  2. Introduction
  3. Tools necessary for this guide
  4. Printer Preparation
  5. Tensioner Pulley Info
  6. Tensioner Pulley Removal
  7. Pulley Assembly Disassembly
  8. Belt-Tensioner-Right Removal
  9. Belt-Tensioner-Right Preparation
  10. Belt-Tensioner-Right Installation
  11. Belt-Tensioner-Pulley Preparation
  12. Tensioner Preparation
  13. Pulley Assembly
  14. Tensioning Bolt Lubrication
  15. Pulley Assembly Installation
  16. Belt Tensioning
  17. Finish
• How to replace a hotend assembly (CORE One)
• How to install the Nextruder V6 Nozzle Adapter (CORE One)
• How to replace the door sensor (CORE One)
• How to replace the side filament sensor (CORE One)