1. Begin assembly

Printer maintenance

• How to replace the main cable (CORE One/+)
• How to install the Nextruder V6 Nozzle Adapter (CORE One)
• How to replace Heatbed (CORE One)
• How to replace Heatbed Thermistor (CORE One)
• Buddy3D Camera for CORE One Installation
• How to replace Z motors (CORE One)
• How to replace the Prusa Nozzle (CORE One)
• How to reverse the door orientation (CORE One)
• How to pack the Prusa CORE One for return - Original Packing material
• How to install Advanced Filtration (CORE One)
• How to pack the Prusa CORE One for return - Custom Packing material
• How to replace the xBuddy board (CORE One)
• How to replace Hotend fan (CORE One)
• How to replace Nextruder Filament Sensor (CORE One)
• How to replace Heatsink NTC Thermistor (CORE One)
• How to replace Hotend Heatsink (CORE One)
• How to replace X and Y Motors (CORE One)
• How to replace the print fan (CORE One)
• How to replace the Heatbed Power Cables (CORE One)
• How to replace the Chamber fan (CORE One)
• How to replace a Hotend Thermistor (CORE One)
• How to replace a Hotend Heater (CORE One)
• How to replace the Belt Tensioner Pulley (CORE One)
  1. Begin assembly
  2. Introduction
  3. Tools necessary for this guide
  4. Printer Preparation
  5. Tensioner Pulley Info
  6. Tensioner Pulley Removal
  7. Pulley Assembly Disassembly
  8. Belt-Tensioner-Pulley Preparation
  9. Tensioner Preparation
  10. Pulley Assembly
  11. Tensioning Bolt Lubrication
  12. Tensioner Installation
  13. Belt Tensioning
  14. Finish
• How to replace the Belt Tensioner Left (CORE One)
• How to replace the Belt Tensioner Right (CORE One)
• How to replace Loveboard (CORE One)
• How to replace a hotend assembly (CORE One)
• How to replace the door sensor (CORE One)
• How to replace the side filament sensor (CORE One)