1. Begin assembly

Printer maintenance

• How to replace heatbed (CORE One)
• How to replace Heatbed Thermistor (CORE One)
  1. Begin assembly
  2. Introduction
  3. Tools Required
  4. Printer Preparation 1
  5. Printer Preparation 2
  6. Side Cover Removal
  7. Side Panel Removal
  8. Back Cover Removal 1
  9. Back Cover Removal 2
  10. xBuddy Cover Removal
  11. Cable Unmounting
  12. Cable Disconnection
  13. Cable Removal
  14. Cable Uncovering
  15. Cable bundle Separation
  16. Heatbed Removal
  17. Heatbed Disassembly
  18. Heatbed Prep
  19. Thermistor: parts preparation
  20. Thermistor Installation
  21. Thermistor Installation 2
  22. Thermistor Installation 3
  23. Heatbed Parts Preparation
  24. Heatbed Cable Assembly 1
  25. Heatbed Cable Assembly 2
  26. Cable Cover Attachment
  27. Expansion Joint Inspection
  28. Heatbed Attachment 1
  29. Heatbed Attachment 2
  30. Cable Guidance
  31. Cable Covering
  32. Cable Guidance 2
  33. Cable Mounting
  34. Cable Guidance 3
  35. Cable Connection
  36. Zip-Tie Installation
  37. Power Cable Connection
  38. xBuddy Cover Installation
  39. Rear Cover Installation
  40. Side Cover Installation
  41. Final Preparation
  42. Selftest
• Buddy3D Camera for CORE One Installation
• How to replace the Prusa Nozzle (CORE One)
• How to reverse the door orientation (CORE One)
• Packing the Prusa CORE One for return - Original Packing material
• How to install Advanced Filtration (CORE One)
• Packing the Prusa CORE One for return - Custom Packing material
• How to replace the xBuddy board (CORE One)
• How to replace Heatsink NTC Thermistor (CORE One)
• How to replace Hotend Heatsink (CORE One)
• How to replace a hotend assembly (CORE One)
• How to install the Nextruder V6 Nozzle Adapter (CORE One)
• How to replace the door sensor (CORE One)
• How to replace the side filament sensor (CORE One)