1. Begin assembly

Printer maintenance

• How to install the Nextruder V6 nozzle adapter (CORE One L)
• How to replace the Prusa Nozzle (CORE One L)
• How to replace a hotend assembly (CORE One L)
  1. Begin assembly
  2. Introduction
  3. Tools necessary for this guide
  4. Printer preparation (part 1)
  5. Printer preparation (part 2)
  6. Removing the printer top cover
  7. Protecting the heatbed
  8. Accessing the hotend cables
  9. Disconnecting the hotend cables
  10. Removing the hotend assembly
  11. Hotend assembly parts preparation
  12. Inserting the new hotend assembly
  13. Checking the nozzle
  14. Connecting the hotend cables
  15. Guiding the hotend cables
  16. Attaching the Printhead-cover-left
  17. Attaching the printer top cover
  18. Turning the printer on
  19. Nozzle set up
  20. Final check
• How to replace the hotend fan (CORE One L)
• How to replace the side filament sensor (CORE One L)
• How to install the advanced filtration (CORE One L)
• How to replace a Hotend Heater (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)
• How to replace Nextruder Filament Sensor (CORE One L)
• How to replace the print fan (CORE One L)
• How to replace the Accelerometer (CORE One L)
• How to replace Hotend Heatsink (CORE One L)
• How to reverse the door orientation (CORE One L)
• How to replace Loveboard (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)