⬢Por favor prepara las herramientas para este capítulo:
⬢1.5mm Allen key for possible nut alignment
⬢Llave Allen de 2.5mm para tornillos M3
The MMU3 for the MK4 printer necessitates the use of the most recent buffer cartridge design, Version B.
Insert the bearing into the center opening in the wheel.
Si tienes alguna pregunta sobre algo que no se ha tratado aquí, comprueba nuestros recursos adicionales.
Y si eso no lo soluciona, puedes enviar una petición a [email protected] o mediante el botón que hay más abajo.