Measurement tool

Relevante para :
Ultima actualización 2 years ago
Este artículo está también disponible en los siguientes idiomas: 
EN
The measurement tool is a feature long demanded by our community. It's available starting with PrusaSlicer 2.6 alpha.

The measurement tool utilizes a geometry detection algorithm that recognizes points (vertices), edges, circles, and planes. Users can check model dimensions and angles directly in PrusaSlicer. 

You'll find the tool in the left toolbar.

The Measurement tool allows you to uniformly scale the object to the required length by clicking on the measured distance in the scene.

It is possible to measure distances and angles between parts of a single object to better align them, but not between separate objects.

One of the current limitations of this tool is its behavior on objects with overlapping parts. In such cases, the parts are considered individually, meaning that edges created by the intersections are not detected, and planes hidden inside other parts are. The tool also does not work well with negative volumes, which are considered parts.

 

¿Fue útil este artículo?

Comentarios

¿Todavía tienes preguntas?

¿Todavía tienes preguntas?

Si tienes alguna pregunta sobre algo que no se ha tratado aquí, comprueba nuestros recursos adicionales.
Y si eso no lo soluciona, puedes enviar una petición a [email protected] o mediante el botón que hay más abajo.

Contacta con nosotros