English
1. Tools necessary for this chapter
Step 1 of 11 (Chapter 4 of 11)
Contents
Comments
⬢Needle-nose pliers for tension check.
⬢2.5mm Allen key for M3 screws
Contents
Original Prusa i3 MK3S kit assembly (v3.15)
- 1. Introduction
- 2. Y-axis assembly
- 3. X-axis assembly
- 4. Z-axis assembly
- Tools necessary for this chapter
- Z-axis: assembling motor holders
- Placing the Z-screw covers
- Z-axis: assembling the motors
- X-axis: trapezoidal nuts (part 1)
- X-axis: trapezoidal nuts (part 2)
- Assembling the X-axis and smooth rods
- Placing the Z-axis-top parts (part 1)
- Placing the Z-axis-top parts (part 2)
- Haribo time!
- Z-axis is finished!
- 5. E-axis assembly
- 6. LCD assembly
- 7. Heatbed & PSU assembly (Black PSU)
- 7. Heatbed & PSU assembly (Silver PSU)
- 8. Electronics assembly
- 9. Preflight check
- Manual changelog
I suggest the total time for this step be 45 minutes - or are we in a hurry?