1. Get the necessary tools

Original Prusa i3 MK2 Bausatz

• 1. Introduction
• 2. Y-axis assembly
• 3. X-axis assembly
• 4. Z-axis assembly
• 5. Extruder Assembly
• 6. LCD assembly [Übersetzung in Arbeit]
  1. Get the necessary tools
  2. 3D printed parts
  3. Preparing the LCD support for assembly
  4. Adjusting the LCD-support
  5. Assembling the LCD-cover
  6. Securing the LCD controller
  7. Assembling the LCD knob
  8. Plug in the cables
  9. Secure the LCD display onto the printer
  10. Secure the LCD assembly
  11. Guiding the LCD cables
  12. All done!
• 7. PSU & Heatbed assembly
• 8. Electronics assembly
• 9. Preflight check