Original Prusa MK3.5S

Using the printer

PETG

Basic info PETG is one of the most easily printable materials, it is inexpensive and suitable for beginners. Relatively high tenacity and temperature resistance make it suitable…

Read the article

Adjusting belt tension (MK4/S, MK3.9/S, MK3.5/S, MK3/S/+)

Loose belts would cause a printer to malfunction and prevent proper printing. It can cause Layer shifting, Ghosting, or other print abnormalities like getting an irregular shape…

Read the article

Changing or replacing the nozzle (MK2.5/S, MK3/S/+, MK3.5/S)

The Original Prusa MK2.5/S, MK3/S/+, and MK3.5/S use the E3D V6 Hotend. Any nozzle that is compatible with the E3D V6 Hotend can be installed on it. The stock nozzle that accompanies…

Read the article

Cold pull (MK3/S/+, MK2.5/S, MK3.5/S)

Prusa Connect and PrusaLink explained

Drying filament

ASA

How to update firmware (CORE One, MK4/S, MK3.9/S, MK3.5/S, XL)

Flexible materials

SD cards and USB drives

Removing filament from extruder manually

Polycarbonate (PC)

PLA

ABS

Polyamide (Nylon)

Sending G-codes to printer via network (Prusa Connect, PrusaLink, Octoprint)

Checking/re-aligning the Bondtech gear (MK3.5/S, MK3S/+, MK2.5S)

Composite materials (filled with carbon, kevlar or glass)

Where can you get 3D models?

HIPS

Polypropylene (PP)

PVB

Prusa Mobile App

Water soluble (BVOH/PVA)

CPE

Connect Registration Failed

Composite materials (with metal or wood particles)

How to use Prusament refill

Buddy3D Camera

Print surface preparation

How to set a Static IP Address

How to downgrade firmware (MK4/S, MK3.9/S, MK3.5/S, XL)

Regular printer maintenance (MK3.5/S)

Maintenance warning #26117 (MK4S) #13117 (MK4) #27117 (MK3.9S) #21117 (MK3.9) #28117 (MK3.5S) #23117 (MK3.5)

ESP Camera for Prusa Connect

Wi-Fi and Prusa Connect/Link setup (CORE One, MK4/S, MK3.9, MK3.5, XL, MINI/+)

Adding the printer to Prusa Connect (CORE One, MK4/S, MK3.9/S, MK3.5/S, XL, MINI/+)

Prusa Connect - Telegram notifications setup

Prusa Connect - Discord notifications setup

Prusa Connect - Slack notifications setup

How to replace a Heatbed Thermistor (MK4/S, MK3.9/S, MK3.5/S)

How to use accelerometer (MK3.5/S)